Aerostich Expedition/Tour Snap and Zipper Repair Pack

$15.00
SKU
380

The essentials for emergency repairs on the road. 15 pieces (five sliders, six stops, and one snap: four pieces). Includes instructions. Works with zippers on pre-2012 Aerotich garments. Call Customer Care for zipper repair options on new style zippers.

Additional Information/Resources:

Zipper Problems?

Zipper Problems?

Modern zippers are precisely engineered micro-machines which usually work trouble free for years and years. When problems occur they are almost always caused by mis-uses like over-forcing a jammed slider, though sometimes dirt contamination, direct impacts or long wear also cause failures.

If you ride a lot it's a good idea to always carry an emergency replacement slider like this: FixnZip -- especially on day long rides and multi-day trips. Leave one of these at the bottom of any pocket and it will always be there when you (...or a riding buddy) need it.

Aerostich garments contain two different zipper types: Nylon molded-teeth with locking sliders for the main openings, pant-to-jacket connectors, and wrist gussets -- and a nylon coil style with non-locking sliders for vents and pockets. Both divide further into water-resistant and traditional styles. Most Aerostich zippers now are the water-resistant type.

These highly water-resistant zippers feature miniature gasketing systems, ultra-closely dimensioned internal tolerances, and vinyl covered knit nylon 'tapes' on either side of the zipper's teeth or coils. These specialized zippers come pre-lubricated and this lubricant should be renewed at least annually. We like this stuff: Teflon Multi-Use Lubricant because it lasts a long time, doesn't leave greasy residue, and doesn't collect dirt. Single-use lubricant packages are included with all new Aerostich garments, and are available separately here: Aerostich Single-use Zipper Lubricant

If fabric jams the slider, don't pull harder without examining the area first. Sometimes it's best to try and pull the fabric outward from the jam and other times it's better to carefully force the slider backward down the zipper.

If a zipper jams at the same place more than once, try creasing the adjacent fabric to help it ‘remember’ to stay away from the zipper’s slider better. And practice using one finger to help guide the fabric away, or pull the slider past this area with a slight upward or outward vector so the adjacent fabric is flattened away from the slider.

Aerostich toothed-zipper sliders all lock in place whenever the slider's handle is lying flat. Pulling the handle upward releases a spring-tensioned internal locking pin, allowing slider movement. If a zipper slider moves when it's not supposed to the slider’s handle is being pulled slightly upward, usually by pressure from adjacent fabric

If you have questions about zipper use, zipper repairs or anything else zipper-related, please give us a call. And if you need a replacement zipper or slider to fix any Aerostich garment, let us know and we will send at no charge.

Write Your Own Review
Please Sign in or create an account to leave a review.

Related products

Check items to add to the cart or
© 2022 Aero Design & Mfg. Co. All Rights Reserved.