A urethane cure accelerator, thinner and pre-cleaner to be used in conjunction with Aquaseal® and all other urethane-based sealants including Freesole and Seam Grip. The solvent cleans and prepares the surface and shortens drying time. Cotol-240 is also ideal for removing tar, sap, glue, and other resins from various surfaces including glass, plastic and metal. .5 oz.
Cotol-240™ Directions for use with Seam Grip® or Freesole® Urethane Repair Adhesive and Sealant:
Apply a small amount to the damaged area (spot test for colorfastness).
Rub with a clean cloth until dry.
Repeat steps 1 and 2.
Apply Seam Grip or Freesole as directed.
Note: for best adhesion, first roughen non-fabric
surfaces with sandpaper.
AS CURE ACCELERATOR:
Thoroughly mix 1 part cure accelerator with 3/4 parts Seam Grip® or Freesole® using a stick, toothpick, or knife. Mix on a non-absorbent surface such as a plastic lid or plate.
Immediately apply the mixture to the damaged area.
Allow the repair to completely cure at least 2 hours before using.
FOR COLORS: Mix food coloring or paint colorant (available at paint stores) into the Aquasure and cure accelerator before applying.
CLEAN-UP: To remove Seam Grip® or Freesole® from hands, use cloth soaked with paint thinner, nail polish remover or 99% isopropyl alcohol.
STORAGE: Cap tightly. Store in cool, dry place. Use blister card package for storage.