DIRECTIONS Seam Sealing:

1. CLEAN surfaces with Seam Grip® Seam Cleaner or isopropyl alcohol.

2. APPLY Seam Grip® to inside of seam. Apply thin film, holding tube opening flat against seam. Lightly squeeze and draw tube across threads. Seam Grip® may also be applied with brush. Use brush to even out any heavily coated areas.

3. LET DRY overnight (approximately 12 hours may be longer in low humidity. For 2-hour dry time, mix small batches of Seam Grip® with Cotol-240™. Apply with brush. Mix new batches as needed.

4. STORAGE: Wipe cap clean, advance contents to tube neck and cap securely. Store in cool, dry place.

5. CLEAN-UP: Clean hands with isopropyl alcohol.

NOTE: Fully-cured Seam Grip® may cling to itself when folded. After first application, lightly dust fully-cured areas with Pro-Talc™ or talcum powder.