A to B

Portable, maximum peace-of-mind protection, whether home is in a high theft risk area, you are overnighting in a questionable off-the-beaten-path motel or you just want to make sure your bike and gear is still going to be there when you return. Special hardened steel 10mm chain and integrated X-Plus cylinder uses automatic keyhole cover to protect against dirt and corrosion. Long 2'9” length allows options for securing, including fixed objects or joining multiple bikes together. Two included keys, including one with a handy built-in LED light. Fabric sleeve prevents scratching. 4.6 lbs. Black.

Additional Information/Resources:

Equipped with a super-tough vinyl coated 8mm steel cable, the lightweight and easy to pack locking cable is long enough to lock up a lot of stuff in a secure manner. Run through the sleeve and leg of a Roadcrafter and through a helmet, and this lock will allow you to roam unencumbered by gear or (an excess of) worry at rallies or races. Lock has a changeable combination and is non-corrosive. Length: 10'.

Cable/Chain Comparison (w/ and w/out locks)

Additional Information/Resources:

Secure your helmet, suit, tank bag or duffel bags in seconds. Works just like a tape measure but uses a spring retractable 36" coated 2.5mm steel cable and resettable three dial combination. Small and light in your shirt pocket but strong enough to discourage bad guys. Locks solid to any length. Lets you relax when seated at some restaurant where you can’t keep an eye on your bike.

Cable/Chain Comparison (w/ and w/out locks)

Additional Information/Resources:

A massively intimidating anti-theft alarm encased in a seriously strong lock, complete with double-locking 14 millimeter carbide reinforced locking pin with 60mm throat width and pick-proof, ice-spray proof key-barrel. Auto-arming, shock or motion-sensitive 120dB alarm powered by a single, long-life CR2 lithium battery for high-performance in all weather conditions. Rugged, corrosion resistant high-nickel content 304 stainless steel mono-block construction. If you want to keep your bike safe, this I lock will do the trick. Includes 3 keys. 10"×3"×8". 1.8lbs.

All-weather riding brought to the next level with these easy to attach quick change snow claws. Add extra traction for riding in slippery conditions including snow, ice, sand, gravel or mud. Low profile design installs to any open rim tires. Rugged V2A steel constructed claws measure 8mm high, allowing clearance for use on most bikes. Easily secure to wheel with 1.5mm straps. Set of 5 claws.

All RAM systems use a 1" ball and socket system. This super strong rubber ball and socket system provides mounting flexibility and protects electronics from damage due to vibration. All components are interchangeable so you can switch attachments at either end of the clamping stalk for maximum versatility.

Camera base with ¼" screw mount and 1" ball. Works with all cameras and camcorders with threaded mounting holes. Other two type adaptable to all kinds of devices and platforms.

All RAM systems use a 1" ball and socket system. This super strong rubber ball and socket system provides mounting flexibility and protects electronics from damage due to vibration. All components are interchangeable so you can switch attachments at either end of the clamping stalk for maximum versatility.

A mounting ball that attaches to your bike's handlebar clutch/brake perch, left or right side. Also accepts an Extra Ball to make it a double mount.

All RAM systems use a 1" ball and socket system. This super strong rubber ball and socket system provides mounting flexibility and protects electronics from damage due to vibration. All components are interchangeable so you can switch attachments at either end of the clamping stalk for maximum versatility.

Camera base with ¼" screw mount and 1" ball. Works with all cameras and camcorders with threaded mounting holes. Other two type adaptable to all kinds of devices and platforms.

All RAM systems use a 1" ball and socket system. This rubber ball provides mounting flexibility and protects electronics from damage due to vibration. All components are interchangeable so you can switch attachments at either end of the clamping stalk for maximum versatility.

All RAM systems use a 1" ball and socket system. This super strong rubber ball and socket system provides mounting flexibility and protects electronics from damage due to vibration. All components are interchangeable so you can switch attachments at either end of the clamping stalk for maximum versatility.

A handlebar clamp base with one or two balls. Add spacer to protect finish or to fit on smaller bars.

All RAM systems use a 1" ball and socket system. This super strong rubber ball and socket system provides mounting flexibility and protects electronics from damage due to vibration. All components are interchangeable so you can switch attachments at either end of the clamping stalk for maximum versatility.

Camera base with ¼" screw mount and 1" ball. Works with all cameras and camcorders with threaded mounting holes. Other two type adaptable to all kinds of devices and platforms.

An evolved system for quickly and securely mounting your smartphone to your bike. The included X-Grip® cradle has a spring-loaded four leg design that sports great holding power without hiding your phone behind foam pads and plastic, expanding and contracting for a custom fit. The mount is designed with a RAM 1 in. ball and socket system adjustment points at both ends of the double socket arm, allowing for almost infinite viewing angles. A zinc coated u-bolt base attaches securely into handlebars, or any tube up to 1.25" in diameter. Works with devices with or without a case. X-Grip Dimensions: Min. width = 1.875", Max. width = 3.25", Depth = 0.875".

An elegantly simple but super tough kit to secure any modern smartphone to the handlebars of your motorcycle. Sturdy enough to keep a tight grip over streets and big enough to hold larger phones. Three modular pieces combine to make one spiffy unit that is a snap to put on and take off, staying in place with a handy, easy-grip twist knob. Choose from three arm lengths to use your phone for navigation, taking ride video footage, playing your favorite tunes or just to keep it at the ready. 1.75", 3" or 5.25" arm lengths.

All RAM systems use a 1" ball and socket system. This super strong rubber ball and socket system provides mounting flexibility and protects electronics from damage due to vibration. All components are interchangeable so you can switch attachments at either end of the clamping stalk for maximum versatility.

A mounting ball that attaches to your bike's handlebar clutch/brake perch, left or right side. Also accepts an Extra Ball to make it a double mount.

All RAM systems use a 1" ball and socket system. This super strong rubber ball and socket system provides mounting flexibility and protects electronics from damage due to vibration. All components are interchangeable so you can switch attachments at either end of the clamping stalk for maximum versatility.

Dual 1" diameter open ball sockets with a 360˚ center rotation point for unsurpassed adjustability.

A bottle-opener and universal smartphone bar mount combo attaches your smartphone to any handlebars or frame tube. The durable aluminum base piece functions as a convenient bottle opener as well as quickly and securely attaching any smartphone or portable electronic device via durable and highly expandable silicone strap. Fits devices with or without cases and allows full functionality while mounted. View maps, run GPS apps, use camera or video functions, or use your phone as a light at night. Works great to secure flashlights, bike pumps or other small devices too. And at the end of a long riding day it quickly pops the top off a cold, refreshing bottled beverage. Ahhh, neat. 3.5”x1.5”x2”. Charcoal.

Add a water bottle cage to any motorcycle or bicycle, anywhere there’s room. Flexible block and hook-and-loop strap secures any standard cage onto downtubes, handlebars, seatposts, or anywhere space is available. Keeps your cold refreshing beverage easily accessible for every ride. Does not include cage or water bottle. Block and straps only.

Elegant and rugged construction. Nicely made and very adjustable, this bracket holds a myriad of possibilities for the motorcycle gadgeteer. Lightweight aluminum bar and brackets make it easy to modify (saw, file, big hammer, etc...) for other custom mounting of applications like radios, GPSs, etc. Plate is 4.25"×3.3".

Bright, warm 700 lumen output in a plug-and-play replacement signal bulb set. High quality for superior output and performance, brighter than stock signal lights. Heat sink equipped to dissipate excess warmth generated in use. CAN-bus compatible. Sold in pairs. White or Yellow. Choose Straight (R10W) or Offset (RY10W). 10W.

These combination tail light and stop lights feature 16 high-quality, low-draw LEDs, so they reduce both the weight on your bike's rear fender, and the load on the electrical system. So compact they fit any rear-ward surface, yet large enough to provide good lighting. Easy installation, and features a tough, high impact, all-weather case. Features a thick, solid, non-flexible backing with two fixed post bolts for mounting. Augment or replace your bike's tail light. 12V. (4.3"x.75"x.75")