Tire Repair Tools

Two-pocket neoprene sleeve to hold your tire irons.

Big, beefy rim protection is what you get from these durable, oversized nylon rim savers. Real protection from potential damage caused by tire levers during changes, the raised beads facilitate inserting the lever under the bead and prevent slipping. The long apron protects hands and spokes, while the sizable finger holds make repositioning a breeze. Made with rugged DuPont Zytel® material for unmatched toughness and durability. (5.75"×4.5"×.5"). Set of 2.

Great for trail or roadside repairs. These hard anodized, aluminum tools are box wrenches on one end and an efficient tire iron on the other. You can remove both the axle and the tire with one tool. Replace the flimsy factory tool kit wrenches. If you have wrenches for both your front and rear axle, that means you’ll have two irons for wrestling your flat off, and after patching, back onto the rim. Wrenches are under 10" long, less than 5 oz. and fit nicely in a tool roll. Neat.

Convert the Aluminum Tire Lever/Wrench Combo (or any other 24mm or 27mm wrench) into a non-ratcheting 3/8" drive socket wrench. 0.9"×1.25", 1.8 oz.

A simple, re-usable wheel balancing solution. Slide the CNC machined solid brass or nickel weights over the spoke and tighten a single allen set screw to the spoke nipple. Adjust the amount of weight and placement as necessary to achieve the perfect balance. Fits all sizes of spokes on today’s most popular dual sports. A versatile balancing tool that contains no lead and is re-usable, making it an environmentally friendly balancing option. Kits contain eight weights: two 1 oz, two ¾ oz., two ½ oz., two ¼ oz. Specify Brass or Nickel.

For motorcycle wheels that are open in the middle (regular or cast spokes). It’s also packable, but it is really a little larger then most riders will want to carry. Ideal for garage workshop use. Adjustable for all sizes of wheels/tires. 17.5"x2"x2", 4.5 lbs.

Losing air from a motorcycle tire can have grave consequences. Manufacturers themselves state that an uncapped tire stem is not secure from leakage without a sealed cap. These practical and well-made valve caps seat an 0-ring to provide that final seal, and have flexible retainers that ensure you won’t misplace them. Neat. Fully compatible with the latest Tire Pressure Monitoring (TPM) valves made from aluminum. Nylon (set of 5).

Perfect for conserving storage space in racetrack vans and small garages, this tool balances wheels precisely but doesn’t take up much room when not in use. Beautifully machined aluminum pillow blocks hold low friction bearings and rest perfectly on any two chairs, stools or garage jack stands: voila! A fast, accurate wheel balancer. 1.5 lbs.

COMPATIBILITY CHART

A compact tool manufactured from steel hex stock for the removal and installation of valve cores on either tubed or tubeless tires. Inexpensive and durable. 2.75"×0.4", 1 oz.

Ultra compact and effective as a threaded tire deflator and core removal/installation tool, this fits anywhere and does the job when needed. Knurled for ease of use. Simple, tiny, and effective. 1.1"×0.5", 0.7 oz.

Front axle removal tool for use with the Compact Wheel Balancer.

Avoid the expense, downtime and trouble of scheduling tire changes at a shop and gain the satisfaction of knowing the job was done perfectly (and is ready just when you need it). With this balancer and a couple of tire irons (plus a bead breaker for tubeless tires) anyone can get a precision balanced tire in a few minutes.

Method: First, lock the axle to your wheel and set the wheel/axle/bearing assembly into the bearing saddles on the stand. Then, slowly spin, mark the low spot, repeat, add (tape it on) a temporary weight, spin, mark, repeat, re-weight, spin, repeat, etc… When wheel always stops at random points, securely attach the required weights and the job is finished. Ultra-low friction bearings make the process very sensitive to the smallest change in weight for super accurate results.

This stand’s removable axle design also allows for more compact storage. Optional cup and cone type adapter fits most wheels used on single sided swing arms. 14mm axle also allows use of standard BMW Paralever wheel adapters (available from BMW).

Strong frame and a durable gray powder coated finish make this a valued shop tool that will be a pleasure to use for years. Measures 18”×20.5”×10”. 10 lbs. Save time and money while getting the satisfaction of doing it yourself. Definitely a nice balance. Made in America

Additional Information/Resources:

Avoid the expense, downtime and trouble of scheduling tire changes at a shop and gain the satisfaction of knowing the job was done perfectly (and is ready just when you need it). With this balancer and a couple of tire irons (plus a bead breaker for tubeless tires) anyone can get a precision balanced tire in a few minutes.

Method: Slowly spin, mark the low spot, repeat, add (tape it on) a temporary weight, spin, mark, repeat, re-weight, spin, repeat, etc… When wheel always stops at random points, securely attach the required weights and the job is finished. Ultra-low friction bearings make the process very sensitive to the smallest change in weight for super accurate results. Finely finished cantilever frame is easier to use than a conventional stand: lock the axle to your wheel and set the bearings into the saddles on the stand.

The balancer uses larger bearings for maximum sensitivity and durability, and features a stronger and stiffer frame that doesn't flex or vibrate, and which provides more stability. This stand’s removable axle design also allows for more compact storage.

Optional cup and cone type adapter fits most wheels used on single sided swing arms. 14mm axle also allows use of standard BMW Paralever wheel adapters (available from BMW). Strong frame and a durable gray powder coated finish make this a valued shop tool that will be a pleasure to use for years. Measures 18"×20.5"×10". 10 lbs. Save time and money while getting the satisfaction of doing it yourself. Definitely a nice balance.

Fits all single sided BMW wheels up to 2004 models.

Fits all R and K model bikes from 2004 on (with the exception of K1200LT).

NOTE: This adapter will NOT work on liquid cooled R1200GS with CAST wheels. It will also NOT work on 2014 > BMW R1200RT. BMW modified the hub size on those models but only on cast wheels. Liquid cooled GS with spoke wheels is the same as they were in earlier years.

Slide this lightweight CNC Aluminum wrench adapter onto a Titanium Tar Arn to assemble the lightest, most compact, elegant axle wrench available. Anywhere. We love this tool, not because we invented it (we did...), but because it packs so small and works so great. Just place it on your axle and pull. 24mm Only. (27mm, 32mm sold out).

These allow you to set tappet clearance adjustments quickly and easily. Angled blade for easy access to tappets. Set contains .002–.003, .004–.005 and .006–.008 feeler gauges.

This handy little tool helps push the bead down into the rim and keep it in place while changing a tire. Won’t mar or damage rim. Lightweight aluminum and nylon. 2.25"×1"×.625", 1 oz.