For the Bike

These new headlight bulbs are smaller and brighter than any last gen stuff especially at this price. The latest tech upgrades and Philips Luxeon chips create a super Bright White Intense (BWI) 6000K beam. Shines up to 6000 Lumens. The output of the single beam H7 is 2.8A, and the HI/LO H4 is 3.3A at high beam and 1.6A at 12V for low beam. 40W output power. IP68 waterproof design and made from lightweight 6063 aviation aluminum casing material. Provides long service with an expected 30,000 hour lifespan. Intelligent cooling fan and integrated superconducting technology dissipate heat efficiently. Compact 3.6”x1” bulb and super small 2.6”x1.9”x.7” driver board makes installing and upgrading your existing headlight bulbs a snap. Specify H4 or H7.

LED bulbs provide a lot more light than regular headlight, this features a slightly larger transformer and a more powerful LED set. Features 4 light-generating LED's with a 40/50watt LED for even more light. Larger transformer provides both a longer service life and the greater power required. This bulb kit also uses a machined aluminum screw-on mount flange with a locking allen screw so the position of the LED's inside the headlights reflector can be adjusted very precisely, to help project the best and most useful beam shape.

Super bright and high-quality headlight update kits that provide both whiter and bluer illumination compared to conventional lighting, giving your motorcycle the cutting edge in aesthetics and safety. Throws a 6000 Kelvin beam. Replaces standard headlight on most bikes, choose either H4 or H7 style bulb to fit your motorcycle. Includes 35 watt digital slim ballast which is in a small (3.3"x 2.4" x .6"), sealed aluminum box that can be mounted anywhere and is completely waterproof. Light output is 3 times amount of halogen bulb and 10 times the output of a standard bulb. Specify H4 or H7 Kit. 3200 lumens.

These are very bright. Red versions (solid or flashing) make nice added tail or brake lights, white lights enhance visibility as an auxiliary running light. The reason to use the brake light version is obvious. The reason to add one to the front of your motorcycle isn’t….and is this: Not for roadway illumination, but to make your approach more obvious to those ahead. Why? Because anything unusual stands out. Locating one of these, always-on, next to a front turn signal or beside a headlight turns the usual head-on appearance of a motorcycle into something slightly irregular, thus more clearly standing out from amongst the rest of traffic. Rain and weather proof. Machined aluminum bodies. Includes ‘L’ mounting bracket. Sold in pairs. 1.18” x .8". 3W, 12V. Choose Solid White, Solid Red or Flashing Red.

Note: The wires connecting to the micro-circuit board inside the aluminum light housing are fairly small. We recommend adding 'silicone seal' to the hole in the light housing the wires pass through to provide strain relief and lessen the chance of a wire breaking in use.

Me and the Aerostich Mini LEDs: A Helpful Guide by Douglas Howard

Additional Information/Resources:

Super bright replacement halogen headlight bulbs. Xtreme White Plus technology produces a whiter light color of 4000K and provides the equivalent of 110 watts of illumination from only 55 watts. These are brilliant replacements that will light up road hazards and street signs long before a normal halogen bulb.

Quick and easy to install, these lighted multi-purpose bolts install as license plate lights, daytime driving lights, tail lights, accent lights or an extra light anywhere you need illumination. Low power consumption, long-life 12V lights offer 1W LED illumination. Durable all-weather black aluminum construction, both feature a 5.75mm diameter bolt for easy mounting. 60Cm wire length. Choose Universal Light Bolt or License Plate Light Bolts. White or Red. Sold in pairs.

Easy to wire and connect to the taillight wiring of most motorcycles. Designed to work with existing brake light/taillight system with up to two tail light bulbs. When you apply the brakes, they will light and modulate rapidly, then more slowly over a period of four seconds. Increase conspicuity and be seen by drivers behind you. Exclusive single-wire ISO-Tap design with easy inline hook-up for fool-proof installation. The internal circuitry is controlled by a microprocessor, which allows precise flash patterns, overload detection and reverse polarity protection. NOTE: Not for use on bikes that have bulb-check system or CAN-bus monitoring or LED clusters that share tail & brake inputs.

It’s a bright taillight…until you hit the brakes. Then, it flashes four times fast—pauses—three flashes a little slower—pauses—two more real slow, and it’s on full time as a stop light. The entire flash/pause sequence takes 4 seconds and repeats each time you re-apply the brakes. This complex pattern is commonly and intuitively recognized as a deceleration warning. The bulb’s reliable digital electronics are all contained inside the bulbs base. Choose from widely available, easily replaceable “G-4” halogen bulb version (easy to carry spare bulb is also included), upgrade to long life LED option, or select the dual ballast CAN-bus compatible model for most modern BMW's. Fits standard 1157 dual filament brake/taillight bulb sockets. Legal disclaimer: May not be approved for use in all states.

NOTE: Spare LED element only.

It’s a bright taillight…until you hit the brakes. Then, it flashes four times fast—pauses—three flashes a little slower—pauses—two more real slow, and it’s on full time as a stop light. The entire flash/pause sequence takes 4 seconds and repeats each time you re-apply the brakes. This complex pattern is commonly and intuitively recognized as a deceleration warning. The bulb’s reliable digital electronics are all contained inside the bulbs base. Choose from widely available, easily replaceable “G-4” halogen bulb version (easy to carry spare bulb is also included), upgrade to long life LED option, or select the dual ballast CAN-bus compatible model for most modern BMW's. Fits standard 1157 dual filament brake/taillight bulb sockets. Legal disclaimer: May not be approved for use in all states.

It’s a bright taillight…until you hit the brakes. Then, it flashes four times fast—pauses—three flashes a little slower—pauses—two more real slow, and it’s on full time as a stop light. The entire flash/pause sequence takes 4 seconds and repeats each time you re-apply the brakes. This complex pattern is commonly and intuitively recognized as a deceleration warning. The bulb’s reliable digital electronics are all contained inside the bulbs base. Choose from widely available, easily replaceable “G-4” halogen bulb version (easy to carry spare bulb is also included), upgrade to long life LED option, or select the dual ballast CAN-bus compatible model for most modern BMW's. Fits standard 1157 dual filament brake/taillight bulb sockets. Legal disclaimer: May not be approved for use in all states.

NOTE: Spare bulb element only.

It’s a bright taillight…until you hit the brakes. Then, it flashes four times fast—pauses—three flashes a little slower—pauses—two more real slow, and it’s on full time as a stop light. The entire flash/pause sequence takes 4 seconds and repeats each time you re-apply the brakes. This complex pattern is commonly and intuitively recognized as a deceleration warning. The bulb’s reliable digital electronics are all contained inside the bulbs base. Choose from widely available, easily replaceable “G-4” halogen bulb version (easy to carry spare bulb is also included), upgrade to long life LED option, or select the dual ballast CAN-bus compatible model for most modern BMW's. Fits standard 1157 dual filament brake/taillight bulb sockets. Legal disclaimer: May not be approved for use in all states.

Integrated deceleration-sensing technology illuminates this tail light bulb even when you downshift or slow without applying any braking force. Automatically brightens alerting traffic behind you of reduced speed while decreasing the chance of a rear-end collision. Apply brakes and it functions just like your standard brake light system. Patented design integrates auto-recharging, self-powered capacitors with self-activating technology and long-life LED lamps. Fits most motorcycles, replacing any standard 1154 (6 Volt) or 1157 (12 Volt) type bulb (with the exception of rear-loading lamps). CAN Bus compatible. Rated to last up to 5 years.

Simply a row of super bright red LEDs made to be attached directly to the top or bottom of your license plate using the same mounting holes. Connect to your brake light wires and you’re ready to wake up anyone following a little too close behind you, day or night. No rear end worries. In addition to the brake light feature of the Stopper, the Versa Light version looks the same but also functions as a running light and turn signal indicator. Clearly indicate your intentions. 7"×.75".

Simply a row of super bright red LEDs made to be attached directly to the top or bottom of your license plate using the same mounting holes. Connect to your brake light wires and you’re ready to wake up anyone following a little too close behind you, day or night. No rear end worries. In addition to the brake light feature of the Stopper, the Versa Light version looks the same but also functions as a running light and turn signal indicator. Clearly indicate your intentions. 7"×.75".

These combination tail light and stop lights feature 16 high-quality, low-draw LEDs, so they reduce both the weight on your bike's rear fender, and the load on the electrical system. So compact they fit any rear-ward surface, yet large enough to provide good lighting. Easy installation, and features a tough, high impact, all-weather case. Features a thick, solid, non-flexible backing with two fixed post bolts for mounting. Augment or replace your bike's tail light. 12V. (4.3"x.75"x.75")

Bright, warm 700 lumen output in a plug-and-play replacement signal bulb set. High quality for superior output and performance, brighter than stock signal lights. Heat sink equipped to dissipate excess warmth generated in use. CAN-bus compatible. Sold in pairs. White or Yellow. Choose Straight (R10W) or Offset (RY10W). 10W.

Securely holds a cell phone or other handheld device with a unique spring loaded X-Grip design. Rubber coated tips hold device firm and stable. 1" ball. Standard phone version fits device with Min/Max width .875"/3.25".

All RAM systems use a 1" ball and socket system. This super strong rubber ball and socket system provides mounting flexibility and protects electronics from damage due to vibration. All components are interchangeable so you can switch attachments at either end of the clamping stalk for maximum versatility.

Camera base with ¼" screw mount and 1" ball. Works with all cameras and camcorders with threaded mounting holes. Other two type adaptable to all kinds of devices and platforms.

All RAM systems use a 1" ball and socket system. This super strong rubber ball and socket system provides mounting flexibility and protects electronics from damage due to vibration. All components are interchangeable so you can switch attachments at either end of the clamping stalk for maximum versatility.

A mounting ball that attaches to your bike's handlebar clutch/brake perch, left or right side. Also accepts an Extra Ball to make it a double mount.

All RAM systems use a 1" ball and socket system. This super strong rubber ball and socket system provides mounting flexibility and protects electronics from damage due to vibration. All components are interchangeable so you can switch attachments at either end of the clamping stalk for maximum versatility.

Flat surface mounts.

All RAM systems use a 1" ball and socket system. This super strong rubber ball and socket system provides mounting flexibility and protects electronics from damage due to vibration. All components are interchangeable so you can switch attachments at either end of the clamping stalk for maximum versatility.

Camera base with ¼" screw mount and 1" ball. Works with all cameras and camcorders with threaded mounting holes. Other two type adaptable to all kinds of devices and platforms.

All RAM systems use a 1" ball and socket system. This rubber ball provides mounting flexibility and protects electronics from damage due to vibration. All components are interchangeable so you can switch attachments at either end of the clamping stalk for maximum versatility.

All RAM systems use a 1" ball and socket system. This super strong rubber ball and socket system provides mounting flexibility and protects electronics from damage due to vibration. All components are interchangeable so you can switch attachments at either end of the clamping stalk for maximum versatility.

A tightening screw on the side of the arm clamps firmly in place, and allows you to pivot the ball and socket connection or completely disconnect the ball from the socket.

All RAM systems use a 1" ball and socket system. This super strong rubber ball and socket system provides mounting flexibility and protects electronics from damage due to vibration. All components are interchangeable so you can switch attachments at either end of the clamping stalk for maximum versatility.

A handlebar clamp base with one or two balls. Add spacer to protect finish or to fit on smaller bars.

All RAM systems use a 1" ball and socket system. This super strong rubber ball and socket system provides mounting flexibility and protects electronics from damage due to vibration. All components are interchangeable so you can switch attachments at either end of the clamping stalk for maximum versatility.

No-drill (up to 2") clamp mount for yoke mounting with one ball.

All RAM systems use a 1" ball and socket system. This super strong rubber ball and socket system provides mounting flexibility and protects electronics from damage due to vibration. All components are interchangeable so you can switch attachments at either end of the clamping stalk for maximum versatility.

Flat surface mounts.

All RAM systems use a 1" ball and socket system. This super strong rubber ball and socket system provides mounting flexibility and protects electronics from damage due to vibration. All components are interchangeable so you can switch attachments at either end of the clamping stalk for maximum versatility.

Camera base with ¼" screw mount and 1" ball. Works with all cameras and camcorders with threaded mounting holes. Other two type adaptable to all kinds of devices and platforms.

All RAM systems use a 1" ball and socket system. This super strong rubber ball and socket system provides mounting flexibility and protects electronics from damage due to vibration. All components are interchangeable so you can switch attachments at either end of the clamping stalk for maximum versatility.

Dual 1" diameter open ball sockets with a 360˚ center rotation point for unsurpassed adjustability.

All RAM systems use a 1" ball and socket system. This super strong rubber ball and socket system provides mounting flexibility and protects electronics from damage due to vibration. All components are interchangeable so you can switch attachments at either end of the clamping stalk for maximum versatility.

A mounting ball that attaches to your bike's handlebar clutch/brake perch, left or right side. Also accepts an Extra Ball to make it a double mount.

All RAM systems use a 1" ball and socket system. This super strong rubber ball and socket system provides mounting flexibility and protects electronics from damage due to vibration. All components are interchangeable so you can switch attachments at either end of the clamping stalk for maximum versatility.

Perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. It can be clamped on rails from 0.625" to 1.5" diameter. Ideal for mounting tablets, action cameras, smartphones, rod holders...the options are limited only by your imagination. 4.25"×1.18". Black.

An elegantly simple but super tough kit to secure any modern smartphone to the handlebars of your motorcycle. Sturdy enough to keep a tight grip over streets and big enough to hold larger phones. Three modular pieces combine to make one spiffy unit that is a snap to put on and take off, staying in place with a handy, easy-grip twist knob. Choose from three arm lengths to use your phone for navigation, taking ride video footage, playing your favorite tunes or just to keep it at the ready. 1.75", 3" or 5.25" arm lengths.

An evolved system for quickly and securely mounting your smartphone to your bike. The included X-Grip® cradle has a spring-loaded four leg design that sports great holding power without hiding your phone behind foam pads and plastic, expanding and contracting for a custom fit. The mount is designed with a RAM 1 in. ball and socket system adjustment points at both ends of the double socket arm, allowing for almost infinite viewing angles. A zinc coated u-bolt base attaches securely into handlebars, or any tube up to 1.25" in diameter. Works with devices with or without a case. X-Grip Dimensions: Min. width = 1.875", Max. width = 3.25", Depth = 0.875".

A bottle-opener and universal smartphone bar mount combo attaches your smartphone to any handlebars or frame tube. The durable aluminum base piece functions as a convenient bottle opener as well as quickly and securely attaching any smartphone or portable electronic device via durable and highly expandable silicone strap. Fits devices with or without cases and allows full functionality while mounted. View maps, run GPS apps, use camera or video functions, or use your phone as a light at night. Works great to secure flashlights, bike pumps or other small devices too. And at the end of a long riding day it quickly pops the top off a cold, refreshing bottled beverage. Ahhh, neat. 3.5”x1.5”x2”. Charcoal.

Add a water bottle cage to any motorcycle or bicycle, anywhere there’s room. Flexible block and hook-and-loop strap secures any standard cage onto downtubes, handlebars, seatposts, or anywhere space is available. Keeps your cold refreshing beverage easily accessible for every ride. Does not include cage or water bottle. Block and straps only.

Elegant and rugged construction. Nicely made and very adjustable, this bracket holds a myriad of possibilities for the motorcycle gadgeteer. Lightweight aluminum bar and brackets make it easy to modify (saw, file, big hammer, etc...) for other custom mounting of applications like radios, GPSs, etc. Plate is 4.25"×3.3".

12V, 40A Bosch-type relay for use with high amp draw electronic accessories like big driving lights, extra loud horns, double sided arm jesters, etc. Waterproof sealed plastic housing with metal mounting tab. Includes installation and wiring instructions. 2.125"×1"×1.25".