The R-3 (Roadcrafter 3) is the third-generation one-piece Aerostich suit. It is 100% waterproof and unlined for maximum airflow, yet slips quickly and easily over your street clothes. Its full-length waterproof zipper entry system is fast, and it doesn’t flutter or flap in the wind. Without a lining, it wears cooler, and with seam-sealed rainproof zippers, you’ll also stay completely dry, even during the wettest conditions.

Each R-3 takes more than an hour longer to manufacture than previous Roadcrafters, but it’s worth it. You’ll enjoy higher levels of performance, comfort, and protection on every ride. And like its predecessor Roadcrafters, the R-3 is constructed of Aerostich’s exclusive mil-spec 500d TLTex® fabric. It’s a strong, long-lasting and highly abrasion-resistant material ideal for this use.

For increased protection, there’s a double layer of this fabric across the seat and 1000d abrasion-resistant layers covering the vital elbow/shoulder/knee areas. Beneath each of these is a superior energy-absorbing system utilizing removable, oversized TF impact armor. Each armor attachment point is adjustable to allow fit to be fine-tuned for comfort and ensure it stays in place for best protection. Separately available hip, spine and chest armor options further increase the R-3’s capabilities.

With its oversized two-slider underarm vents, a two-slider back vent, and magnetic clasps to hold open the fold-down dual-height collar, you ride both cool and protected. As temps drop and when precipitation comes you’ll remain cozy and dry, too, because the adjustable Ultrasuede collar fits comfortably around your neck, even with varying base layers.

Additional features include flap-covered hip-side water-resistant zippers for fast access to your street pants, a hidden pass-thru port for an electric liner power cord, nine strategically placed everyday-useful pockets, a mini-carabiner helmet holder at the upper chest pocket, a highly water-resistant inner wallet/phone/iPod pocket, fit-adjustable ankle and wrist tabs, articulated knees, fit-adjustable waist tabs and an integrated stretch panel across the lower back. There are also oversized 3M Scotchlite® reflective areas across the back, chest, and ankles to enhance conspicuity in low-light conditions.

Over 30 standard color combinations give each R-3 a personalized style, and add-on options include Integrated Boot Raincovers, electrically heated and non-heated Chest Insulation and Impact Pads, an Emergency Medical Info Pocket, and detachable arm and thigh Map and Accessory Pockets.

Four standard body colors: black, grey, tan, and hi-viz lime yellow. Six standard abrasion area colors: black, grey, hi-viz lime yellow, cobalt blue, red, or pink. Machine washable. Men’s sizes 34 regular, 36–54 short, regular, or long. Women’s sizes 2-20 short, regular, or long. Choose TF3 or TF6 armor. Made in USA

The R-3 (Roadcrafter 3) is the third-generation one-piece Aerostich suit. It is 100% waterproof and unlined for maximum airflow, yet slips quickly and easily over your street clothes. Its full-length waterproof zipper entry system is fast, and it doesn’t flutter or flap in the wind. Without a lining, it wears cooler, and with seam-sealed rainproof zippers, you’ll also stay completely dry, even during the wettest conditions.

Each R-3 takes more than an hour longer to manufacture than previous Roadcrafters, but it’s worth it. You’ll enjoy higher levels of performance, comfort, and protection on every ride. And like its predecessor Roadcrafters, the R-3 is constructed of Aerostich’s exclusive mil-spec 500d TLTex® fabric. It’s a strong, long-lasting and highly abrasion-resistant material ideal for this use.

For increased protection, there’s a double layer of this fabric across the seat and 1000d abrasion-resistant layers covering the vital elbow/shoulder/knee areas. Beneath each of these is a superior energy-absorbing system utilizing removable, oversized TF impact armor. Each armor attachment point is adjustable to allow fit to be fine-tuned for comfort and ensure it stays in place for best protection. Separately available hip, spine and chest armor options further increase the R-3’s capabilities.

With its oversized two-slider underarm vents, a two-slider back vent, and magnetic clasps to hold open the fold-down dual-height collar, you ride both cool and protected. As temps drop and when precipitation comes you’ll remain cozy and dry, too, because the adjustable Ultrasuede collar fits comfortably around your neck, even with varying base layers.

Additional features include flap-covered hip-side water-resistant zippers for fast access to your street pants, a hidden pass-thru port for an electric liner power cord, nine strategically placed everyday-useful pockets, a mini-carabiner helmet holder at the upper chest pocket, a highly water-resistant inner wallet/phone/iPod pocket, fit-adjustable ankle and wrist tabs, articulated knees, fit-adjustable waist tabs and an integrated stretch panel across the lower back. There are also oversized 3M Scotchlite® reflective areas across the back, chest, and ankles to enhance conspicuity in low-light conditions.

Over 30 standard color combinations give each R-3 a personalized style, and add-on options include Integrated Boot Raincovers, electrically heated and non-heated Chest Insulation and Impact Pads, an Emergency Medical Info Pocket, and detachable arm and thigh Map and Accessory Pockets.

Three standard body colors: black, grey, tan, and hi-viz lime yellow. Six standard abrasion area colors: black, grey, hi-viz lime yellow, cobalt blue, red, or pink. Machine washable. Men’s sizes 34 regular, 36–54 short, regular, or long. Women’s sizes 2-20 short, regular, or long. Choose TF3 or TF6 armor. Made in America

Jump in, zip up and go. The R-3 'Lights' prioritize every day commuting and errand running. All-in-one protection from weather and other mayhem, with your destination street clothing beneath. Perfect for short-hop on-and-off-the-bike urban use. Also wears great for relaxed day-long rides and on tours of any length.

Advanced zipper and flap designs make this an absolutely waterproof one piece riding suit, and this lighter weight model provides a slightly cooler-wearing experience during hot conditions, too. The suit maintains all the time-tested Roadcrafter design elements for unsurpassed function and a better fit.

R3 Light innovations include completely waterproof zippers, a snap down collar with removable magnetic hold-open clasps, a hidden water-resistant wallet/phone/iPod pocket and custom adjustable impact armor positions.

Options include Integrated Boot Raincovers, Chest Impact and Insulation Pads (Standard and Electric/Heated versions), Boot Raincovers, Back and Hip Armor and all the other Roadcrafter options.

The R-3 Light's 200d HT Nylon outer fabric, plus a hidden layer of 500D fabric at the elbow/shoulder/knee areas, has an abrasion resistance about two-thirds that of an R-3, but still provides real-world protection. May also be worn without any of its Impact Armor for weather or abrasion protection that packs away very compactly.

Twelve color combinations: Grey, Black, or Hi-Viz body colors with Grey, Black, or Hi-Viz abrasion areas. Standard machine washable (with removal of collar magnets). Men's 34 regular and 36–54 short, regular or long. Women's 2-20 short, regular or long. Choose TF3 or TF6 armor. Made in America

The Tactical model eliminates the double-layer of abrasion-resistant fabric at the elbow/shoulder and knee areas. While slightly decreasing the total abrasion resistance at these areas, this allows the ultralight weight Tactical to wear even cooler and provides slightly more ease of movement. Everything else is the same as an R-3 Light. Available colors: black, grey, or hi-viz lime yellow.

Jump in, zip up and go. The R-3 'Lights' prioritize everyday commuting and errand running. All-in-one protection from weather and other mayhem, with your destination street clothing beneath. Perfect for short-hop on-and-off-the-bike urban use. Also wears great for relaxed day-long rides and on tours of any length.

Advanced zipper and flap designs make this an absolutely waterproof one-piece riding suit, and this lighter-weight model provides a slightly cooler-wearing experience during hot conditions, too. The suit maintains all the time-tested Roadcrafter design elements for unsurpassed function and a better fit.

R3 Light innovations include completely waterproof zippers, a snap-down collar with removable magnetic hold-open clasps, a hidden water-resistant wallet/phone/iPod pocket and custom adjustable impact armor positions.

Options include Integrated Boot Raincovers, Chest Impact and Insulation Pads (Standard and Electric/Heated versions), Boot Raincovers, Back and Hip Armor and all the other Roadcrafter options.

The R-3 Light's outer fabric has an abrasion resistance about two-thirds that of an R-3, but still provides real-world protection. May also be worn without any of its Impact Armor for weather or abrasion protection that packs away very compactly.

Standard machine washable (with removal of collar magnets). Men's 34 regular and 36–54 short, regular or long. Women's 2-20 short, regular or long. Choose TF3 or TF6 armor. Made in America.

Thirty years on this fully lined Roadcrafter has been worn in every type of weather to nearly every place you can get to on a motorcycle. It is the original suit for everyday, all-distance commuting and touring.

Its luxurious full lining slips easily over your street clothes, and the outer shell is tailored to minimize wind flutter and drag at higher speeds.

More than three decades of experience have proven the Roadcrafter Classic's superior impact and abrasion-protection, and it's all-weather capabilities. The suit is literally covered with innovations for riders: 3M high-visibility Scotchlite™ reflective, nine strategically placed everyday-useful external pockets, six standard oversize TF impact armor pads, provisions for optional removable arm and thigh map pockets, optional hip armor and impact protection spine armor, effective water resistant zippered underarm and back vents, flapped hip-side zippers for access to your street pants, an all-day comfortable Ultrasuede collar, and a variety of adjustable tabs and zippers that allow you to custom fine-tune the fit.

Each one piece Roadcrafter Classic is about attention to each detail, real-world riding needs and meticulous craftsmanship. It's constructed of Made-in-USA mil-spec 500 Denier Cordura® TLTex® outer fabric, ballistic nylon and a high pic Supernyl lining fabric.

Compared to traditional leather gear you'll ride warmer when it's cool, drier when it's wet and cooler when it's hot.

Three standard body colors: Black, Grey, or Hi-viz Lime Yellow. Eight standard ballistics colors: Black, Grey, Silver, Hi-viz Lime Yellow, Yellow, Tan, Red, or International Orange. Machine washable. Men's sizes 34 regular, 36–54 short, regular or long. Choose TF3 or TF6 armor. Made in America.

Thirty years on this fully lined Roadcrafter has been worn in every type of weather to nearly every place you can get to on a motorcycle. It is the original suit for everyday, all-distance commuting and touring.

Its luxurious full lining slips easily over your street clothes and the outer shell is tailored to minimize wind flutter and drag at higher speeds.

More than three decades of experience have proven the Roadcrafter Classic's superior impact and abrasion protection and its all-weather capabilities. The suit is covered with innovations for riders: 3M high-visibility Scotchlite™ reflective, nine strategically placed everyday-useful external pockets, six standard oversize TF impact armor pads, provisions for optional removable arm and thigh map pockets, optional hip armor and impact protection spine armor, effective water resistant zippered underarm and back vents, flapped hip-side zippers for access to your street pants, an all-day comfortable Ultrasuede collar, and a variety of adjustable tabs and zippers that allow you to custom fine-tune the fit.

Each one-piece Roadcrafter Classic is all about attention to detail, real-world riding needs, and meticulous craftsmanship. It's constructed of mil-spec 500 Denier TLTex® outer fabric, ballistic nylon, and a high pic Supernyl lining fabric.

Compared to traditional leather gear you'll ride warmer when it's cool, drier when it's wet, and cooler when it's hot.

Four standard body colors: Black, Grey, Hi-viz Lime Yellow, or Tan. Eight standard ballistics colors: Black, Grey, Silver, Hi-viz Lime Yellow, Yellow, Tan, Red, or International Orange. Machine washable. Women's sizes 2-20 short, regular or long (these feature a smaller neck, narrower shoulder, more defined waist, and extra hip room). Choose TF3 or TF6 armor. Made in America.

Exclusive features include a tough abrasion-resistant Mil-spec 500 Denier Cordura® TLTex® breathable/waterproof outer fabric, removable hard shell TF3 or TF6 elbow and shoulder armor, generous 3M Scotchlite™ reflective areas, adjustable anti-flutter sleeve tabs, and removable magnetic collar clasps.

The Darien also accommodates optional TLTec fleece liners that fit perfectly inside this outer jacket. The liner's underarm vent zippers line up, and everything works together perfectly.

Those optional reversible TLTec liners are perfect on cool mornings and for all 'off-the-bike' wear, too. They fold into their own compact zippered pockets, and can be attached to your bike or worn on a belt like a fanny pack. With new construction, an optional zip-in liner zipper (#375) is available at no charge.

Available colors: black, grey, or hi-viz lime yellow. All Darien jackets come with black details. 36–56. Choose TF3 or TF6 armor. Made in America

An ultralight Darien Jacket and pants would make a great urban riding tool (...we said to ourselves). So we build them just this way, using a tough, HT200D Nylon TLTex® fabric. This lightweight Cordura-like material is far tougher than ordinary nylon fabrics of similar weight that offer about a third less abrasion resistance than the regular Darien's stiffer 500D fabric.

On the other hand this lighter weight version provides so much more ease and comfort it's better for many kinds of rugged outdoor activities beyond motorcycle riding.

The Darien Light really comes into its own for commuting and general riding, especially in atrocious weather where it will flat-out work better than whatever you now wear.

The unlined Darien Light Jacket and Pants wear dryer and comfortably across a wide temperature range. Its many integrated features have been rider-proven to work better on all kinds of rides in all kinds of weather.

The Jacket is a lightweight yet hard-as-nails protective system for your upper body that lets you ride in safety and comfort, regardless of harsh conditions. It's light, tough, simple, and practical because that's what works best.

Exclusive features include tough HT200D TLTex® breathable/waterproof outer fabric, removable hard shell TF3 or TF6 foam elbow and shoulder armor, generous 3M Scotchlite™ reflective areas, adjustable anti-flutter sleeve tabs, and removable magnetic collar clasps.

A Darien Light jacket also accommodates a range of optional removable TLTec fleece liners that fit perfectly inside it's breathable/waterproof shell. These liner's vent zippers line up perfectly and fit, feel and work like they were made for a Darien. Which they were.

The optional liners are worn separately beneath an outer Darien Light Jacket they are also perfect alone on cool days for off-the-bike wear. They fold into their own compact zippered pocket and can be attached to your bike or worn on a belt like a fanny pack. With new construction, an optional zip-in liner zipper (#375) is available at no charge.

An optional back pad attaches to all Dariens with pre-installed hook-and-loop. Colors: black, grey, or hi-viz lime yellow. All Darien Light jackets come with black details. 36–56. Choose TF3 or TF6 armor. Made in America

An ultralight Darien Jacket and Pants would make a great urban riding tool (...we said to ourselves). So we build them just this way, using a tough, HT200D Nylon TLTex® fabric. This lightweight Cordura-like material is far tougher than ordinary nylon fabrics of similar weight offer about a third less abrasion resistance than the regular Darien's stiffer 500D fabric.

On the other hand this lighter weight version provides so much more ease and comfort it's better for many kinds of rugged outdoor activities beyond motorcycle riding.

The Darien Light really comes into its own for commuting and general riding, especially in atrocious weather where it will flat-out work better than whatever you now wear.

The unlined Darien Light Jacket and Pants wear dryer and comfortably across a wide temperature range. Its many integrated features have been rider-proven to work better on all kinds of rides in all kinds of weathers.

Same idea and specifications as regular Darien pants except made with tough-but-light HT200 Denier Nylon TLTex® fabric. Perfect for summer street or dual sport riding. In even waist sizes 30–46 regular and long. Black or Grey. Choose TF3 or TF6 knee armor. Made in America

From its revolutionary introduction in 2008 and through its discontinuance in 2013 which was caused by materials (supply-chain) complications, this was the best leather gear available.

The NEW Transit 3 has all of the exact same features and details of the original. It's still just as durable. And as tough. And as waterproof. (The Transit 3's leather is a bit softer and even more comfortable, though.)

This two-piece waterproof/breathable leather suit is a long-term investment in all-weather protection and comfort you will appreciate on every ride. Jacket and Pants are available together or separately.

Waterproof and breathable leather gear that outperforms traditional leathers. It’s made from a new CORIUM+ material combining specially treated high quality leather with an integrated waterproof laminate to provide exceptional levels of protection and comfort in all types of weather.

The unique built-in technology is a breakthrough in toughness and durability, too. In wet, fog or misty conditions it won’t soak up moisture so it never gets heavy, and always dries immediately after riding through severe rain. And the leather itself is ultra-supple, luxurious and flexible.

Inside is a set of six carefully fitted yet easily removable TF armor systems — elbow, shoulder, knee, hip and back pads — to provide superior energy absorption with less movement restriction. So no matter what your local riding conditions and plans, or what the immediate climatic situation, you’ll be a lot more protected and comfortable.

Technically, the Transit’s micro-perforated breathable CORIUM+ leather contains a new, unique, proprietary treatment that helps keep it from absorbing water. The millions of micro-vents across the surface of the leather insure that during high activity the moisture on your skin will evaporate right through, even though the suit is worn fully zipped and closed. Only the finest cow hides are selected for this complicated processing and tanning technology.

Design updates of the new ‘3’ version include waterproof underarm vent zippers, a slightly larger pocket on the right forearm (perfect for toll-road money, house keys, etc.), a fold-away reflective cover over the dual-slider zipped back vent, and a near-full circumference (270°) pant-to-jacket zipper. The main pant and jacket zippers are the newest waterproof type, which further increases the Transit’s durability and functionality. Completely waterproof, and we think bad-ass looking, too. Jacket available in Black or Hi-Viz, sizes 38–52. Pants available in Black only, sizes 30–44 waist. Imported.

Note - The early-production Transit 3 jackets have ‘European’ main zippers. Only the main zipper is this way. This means that the zipper slider on these jackets is located on the left side of the zipper. All Transit 3 jackets manufactured later have ‘American’ style right-handed zippers.

Buy Both & Save

Purchase both the Transit Jacket and the Transit Pants and save $100 off the total price! Discount will automatically be applied during checkout.

Waterproof and breathable leather gear that outperforms traditional leathers. It’s made from a new CORIUM+ material combining specially treated high quality leather with an integrated waterproof laminate to provide exceptional levels of protection and comfort in all types of weather.

The unique built-in technology is a breakthrough in toughness and durability, too. In wet, fog or misty conditions it won’t soak up moisture so it never gets heavy, and always dries immediately after riding through severe rain. And the leather itself is ultra-supple, luxurious and flexible.

Inside is a set of six carefully fitted yet easily removable TF armor systems — elbow, shoulder, knee, hip and back pads — to provide superior energy absorption with less movement restriction. So no matter what your local riding conditions and plans, or what the immediate climatic situation, you’ll be a lot more protected and comfortable.

Technically, the Transit’s micro-perforated breathable CORIUM+ leather contains a new, unique, proprietary treatment that helps keep it from absorbing water. The millions of micro-vents across the surface of the leather insure that during high activity the moisture on your skin will evaporate right through, even though the suit is worn fully zipped and closed. Only the finest cow hides are selected for this complicated processing and tanning technology.

Design updates of the new ‘3’ version include waterproof underarm vent zippers, a slightly larger pocket on the right forearm (perfect for toll-road money, house keys, etc.), a fold-away reflective cover over the dual-slider zipped back vent, and a near-full circumference (270°) pant-to-jacket zipper. The main pant and jacket zippers are the newest waterproof type, which further increases the Transit’s durability and functionality. Completely waterproof, and we think bad-ass looking, too. Jacket sizes 38–52. Pants sizes 30–44 waist. Imported.

Note - The early-production Transit 3 jackets have ‘European’ main zippers. Only the main zipper is this way. This means that the zipper slider on these jackets is located on the left side of the zipper. All Transit 3 jackets manufactured later have ‘American’ style right-handed zippers.

Genuine to the core. Waxed cotton has been used to make garments waterproof and breathable since the 1800’s. Now this time-tested fabric is combined with the advanced technology, innovative design of the Roadcrafter one piece suit to create a highly protective, incredibly comfortable and completely authentic one piece Cousin Jeremy riding suit.

The unique two-zipper entry system allows you to step into the suit and be ready to ride in just seconds. Unzips and removes just as quickly when you arrive at your destination. The luxurious black nylon inner lining slips easily over your street clothes, and the outer shell design is tailored to minimize wind flutter and drag at higher speeds.

Tough but supple 10.10-ounce wax cotton outer fabric requires no ‘break-in’, melding and forming to your body from the very first time you put it on. The more you wear it, the more comfortable it becomes, developing a weathered patina with extended use. Periodically re-waxing your suit will extend the long-life usefulness of this highly functional riding tool as well as maintaining maximum waterproofness in severe riding conditions. Removable TF3 or TF6 armor is included in the shoulders, elbows, and knees, along with a second layer of waxed cotton fabric at these critical areas to increase abrasion protection. Pre-installed loop is integrated into the inner sil-nylon liner for easily adding optional back armor or hip armor.

Over three decades of innovations are integrated into the everyday useful suit features, including: nine strategically placed outer and one inner pocket for ample storage for your everyday carry needs, provisions for optional removable arm and thigh map pockets, effective water-resistant zippered underarm and back vents, flapped hip-side zippers for quick access to your street pants, an all-day comfortable Ultrasuede collar, and a variety of adjustable tabs and zippers allowing for a custom fine-tuned fit. The flaps covering the back vent area and the front logo pocket are made from the same color and weight fabric as the jacket body, but for riders wanting additional nighttime visibility, these flaps can be sewn with optional 3M Scotchlight® Reflective material.

Give a cousin Jeremy a try and you won’t be disappointed with the hand-crafted, waterproof, breathable functionality incorporated into an easy to wear, proven design suitable for riding warmer when it’s cool, drier when it’s wet and cooler when it’s hot. Simultaneously edgy and effortlessly cool, while providing a superior fit, unmatched comfort and extreme performance when riding through all-weather, over any distance to every destination.

Choose from base jacket and pant colors available in Black, Brown, Green, or Orange 10.10 oz. Waxed Cotton fabric, and select from Black, Brown, Green or Orange 10.10 oz. fabric added to the shoulder and elbow areas for increased abrasion protection. Sizes: Men's 34, 36–54 short, regular or long. Women's sizes 2-20 short, regular or long. Choose TF3 or TF6 armor. Made in America

Genuine to the core. Waxed cotton has been used to make garments waterproof and breathable since the 1800’s. Now this time-tested fabric is combined with the advanced technology, innovative design of the Roadcrafter one piece suit to create a highly protective, incredibly comfortable and completely authentic one piece Cousin Jeremy riding suit.

The unique two-zipper entry system allows you to step into the suit and be ready to ride in just seconds. Unzips and removes just as quickly when you arrive at your destination. The luxurious black nylon inner lining slips easily over your street clothes, and the outer shell design is tailored to minimize wind flutter and drag at higher speeds.

Tough but supple 10.10-ounce wax cotton outer fabric requires no ‘break-in’, melding and forming to your body from the very first time you put it on. The more you wear it, the more comfortable it becomes, developing a weathered patina with extended use. Periodically re-waxing your suit will extend the long-life usefulness of this highly functional riding tool as well as maintainin maximum waterproofness in severe riding conditions. Removable TF3 or TF6 armor is included in the shoulders, elbows, and knees, along with a second layer of waxed cotton fabric at these critical areas to increase abraision protection. Pre-installed loop is integrated into the inner sil-nylon liner for easily adding optional back armor or hip armor.

Over three decades of innovations are integrated into the everyday useful suit features, including: nine strategically placed outer and one inner pocket for ample storage for your everyday carry needs, provisions for optional removable arm and thigh map pockets, effecticve water resistant zippered underarma nd back vents, flapped hip-side zippers for quick access to your street pants, an all-day comfortable Ultrasuede collar, and a variety of adjustable tabs and zippers allowing for a custom fine-tuned fit. The flaps covering the back vent area and the front logo pocket are made from the same color and weight fabric as the jacket body, but for riders wanting additional nighttime visibility, these flaps can be sewn with optional 3M Scotchlight® Reflective material.

Give a cousin Jeremy a try and you won’t be dissapointed with the hand-crafted, waterproof, breathable functionality incorporated into an easy to wear, proven design suitable for riding warmer when it’s cool, drier when it’s wet and cooler when it’s hot. Simultaneously edgy and effortlessly cool, while providing a superior fit, unmatched comfort and extreme performance when riding through all-weather, over any distance to every destination.

Choose from base jacket and pant colors available in Black, Brown, Green or Orange 10.10 oz. Waxed Cotton fabric, and select from Black, Brown, Green or Orange 10.10 oz. fabric added to the shoulder and elbow areas for increased abrasion protection. Sizes: Men's 34, 36–54 short, regular or long. Women's sizes 2-20 short, regular or long. Choose TF3 or TF6 armor. Made in America

Classic waxed cotton and modern design merge in a serous riders’ jacket. The CJ’s details and features have been refined across thirty years of rider input and experiences. There are over sixty off-the-rack in stock sizes for a precise, professional fit and unmatched all-day comfort. Waxed cotton provides extreme all-weather performance over any distance and to every destination. It’s proven waterproof and breathable technology that is literally from another century and it still works great and looks amazing today.

The modern ergonomic pockets, vents, armor and numerous other details have all adapted from the well-proven Roadcrafter Classic model (a lightweight Cordura Gore-Tex version of the CJ). This one uses a supple 10.10 oz. English waxed cotton, with an added layer of waxed cotton fabric incorporated for increased abrasion protection at the elbow and shoulder areas. For greater comfort and super fast on-and-off CJ’s are fully lined with black supernyl. It’s a dense weave nylon that looks and feels a bit like satin but is far more durable. Impact protection is provided by removable TF3 or TF6 armor in the shoulders and elbows, with pre-installed hook & loop for adding the optional TF back impact armor.

Large underarm vent zips, a two-way zippered back vent and an adjustable dual height collar allow huge airflow on warmer days and when zipped up with a thermal layer underneath a CJ will keep you warm and protected even in the coolest riding weather.

Nine outer and one inner pocket allow ample storage and organization for your EDC items, including a extra-large zippered cargo pocket on the right chest with a hidden supernyl stash pocket just inside for quick access to cash, cards, or your phone. There’s also a zippered pocket on the right forearm for change, keys or earplugs. Hidden under the upper left chest outer pocket’s weather flap is a helmet holder carabineer, and the pass-thru design behind this pocket provides easy glove storage when gassing up. Large lower cargo pockets feature fold-over flaps for all weather secure stowage.

The rain flaps covering the back airflow vent and front logo pocket are the same fabric as the jacket body, but for riders wanting additional nighttime visibility, these flaps are available on special order with 3M Scotchlight® Reflective material instead.

Colors: Black, Brown, Green or Orange 10.10 oz. Waxed Cotton fabric, with Black, Brown, Green or Orange 10.10 oz. waxed cotton with double-layer shoulder and elbow areas for increased abrasion protection. Sizes: Men's 34, 36–54 short, regular or long. Women's sizes 2-20 short, regular or long. Choose TF3 or TF6 armor. Made in America 

Please note: Some images of the Cousin Jeremy shown on this product page include the reflective on the chest and back. This is a custom option - see Reflective Add for details and pricing.

Looking for an expertly stitched pair of rider’s pants crafted from waxed cotton fabric in a functional style that has been refined by over 30 years of road experience? With a superior fit, unmatched comfort and extreme performance in all-weather, any distance riding?

Beginning with details from the Roadcrafter Classic Pants, this version features a supple and durable 10.10 oz. waxed cotton outer with a second layer of waxed cotton at the knees for more abrasion protection. And for comfort everything is fully lined with durable black supernyl.

Removable TF3 or TF6 impact armor is included in the knees, with pre-installed loop for easily adding optional hip armor. Worn by themselves they are wonderful. The pants have belt loops and a waist drawstring with cordlocks to adjust fit, or the 270º circumferential two way zipper allows them to be secured to the jacket making it nearly as fast and convenient to wear as a one piece suit. Side flaps open to reveal two additional pockets sewn into the lining, and allow side access to inside pants pockets.

Black, Brown, Green or Orange 10.10 oz. Waxed Cotton, with Black, Brown, Green or Orange 10.10 oz. Waxed Cotton on the shoulder and elbow areas. Beard and tattoos optional. Men’s 34, 36–54 short, regular or long. Women’s sizes 2-20 short, regular or long. Choose TF3 or TF6 armor. Made in America 

Classic waxed cotton and modern design merge in a serous riders’ jacket. The CJ’s details and features have been refined across thirty years of rider input and experiences. There are over sixty off-the-rack in stock sizes for a precise, professional fit and unmatched all-day comfort. Waxed cotton provides extreme all-weather performance over any distance and to every destination. It’s proven waterproof and breathable technology that is literally from another century and it still works great and looks amazing today.

The modern ergonomic pockets, vents, armor and numerous other details have all adapted from the well-proven Roadcrafter Classic model (a lightweight Cordura Gore-Tex version of the CJ). This one uses a supple 10.10 oz. English waxed cotton, with an added layer of waxed cotton fabric incorporated for increased abrasion protection at the elbow and shoulder areas. For greater comfort and super fast on-and-off CJ’s are fully lined with black supernyl. It’s a dense weave nylon that looks and feels a bit like satin but is far more durable. Impact protection is provided by removable TF3 or TF6 armor in the shoulders and elbows, with pre-installed hook & loop for adding the optional TF back impact armor.

Large underarm vent zips, a two-way zippered back vent and an adjustable dual height collar allow huge airflow on warmer days and when zipped up with a thermal layer underneath a CJ will keep you warm and protected even in the coolest riding weather.

Nine outer and one inner pocket allow ample storage and organization for your EDC items, including a extra-large zippered cargo pocket on the right chest with a hidden supernyl stash pocket just inside for quick access to cash, cards, or your phone. There’s also a zippered pocket on the right forearm for change, keys or earplugs. Hidden under the upper left chest outer pocket’s weather flap is a helmet holder carabineer, and the pass-thru design behind this pocket provides easy glove storage when gassing up. Large lower cargo pockets feature fold-over flaps for all weather secure stowage.

The rain flaps covering the back airflow vent and front logo pocket are the same fabric as the jacket body, but for riders wanting additional nighttime visibility, these flaps are available on special order with 3M Scotchlight® Reflective material instead.

Colors: Black, Brown, Green or Orange 10.10 oz. Waxed Cotton fabric, with Black, Brown, Green or Orange 10.10 oz. waxed cotton with double-layer shoulder and elbow areas for increased abrasion protection. Sizes: Men's 34, 36–54 short, regular or long. Women's sizes 2-20 short, regular or long. Choose TF3 or TF6 armor. Made in America 

Please note: Some images of the Cousin Jeremy shown on this product page include the reflective on the chest and back. This is a custom option - see Reflective Add for details and pricing.

Looking for an expertly stitched pair of rider’s pants crafted from waxed cotton fabric in a functional style that has been refined by over 30 years of road experience? With a superior fit, unmatched comfort and extreme performance in all-weather, any distance riding?

Beginning with details from the Roadcrafter Classic Pants, this version features a supple and durable 10.10 oz. waxed cotton outer with a second layer of waxed cotton at the knees for more abrasion protection. And for comfort everything is fully lined with durable black supernyl.

Removable TF3 or TF6 impact armor is included in the knees, with pre-installed loop for easily adding optional hip armor. Worn by themselves they are wonderful. The pants have belt loops and a waist drawstring with cordlocks to adjust fit, or the 270º circumferential two way zipper allows them to be secured to the jacket making it nearly as fast and convenient to wear as a one piece suit. Side flaps open to reveal two additional pockets sewn into the lining, and allow side access to inside pants pockets.

Black, Brown, Green or Orange 10.10 oz. Waxed Cotton, with Black, Brown, Green or Orange 10.10 oz. Waxed Cotton on the shoulder and elbow areas. Beard and tattoos optional. Men’s 34, 36–54 short, regular or long. Women’s sizes 2-20 short, regular or long. Choose TF3 or TF6 armor. Made in America