Tools & Connectors

For use when switching out or installing molex connectors. The Universal has both male and female ends for removing male and female molex connectors. The ATX remover has a male only end for removing ATX molex connectors or adding wire sleeves. Simply insert and push. Works a lot better than jamming a screwdriver in the hole or trying to dig the connector out with needle-nose pliers, only to find you’ve fudged up the whole nylon housing in the process. 3.75", 1 oz.

This pliers’ particular combination of jaw width and length, and fulcrum location make it the best we’ve tried for working with Molex connectors. Wire cutter gauge is adjustable with a thumb slide and the return spring locks closed for carrying. 12-24 gauge AWC wire.

A unique vibration proof and reusable wire connector system that delivers a superior connection to crimping. Simple to use, only wire stripping required. Wire ends are locked between opposing cone shapes when hand tightened, resulting in a positive, strong connection. Really strong. Impossible to pull apart, but they easily unscrew for roadside service or re-use. There are no metal parts and the internal electrical resistance is less than with crimp connectors. Patented and design protected seven ways to Sunday, naturally. Color coded bodies are super tough Nylon 66 resin. These are the ultimate reusable weather tight connectors, and a great way to wire electrical accessories.

A reliable, compact wire connector system that lets you organize electrical accessory connections cleanly. Unlike crimp style connectors, these can be safely undone and reconnected as needed, over and over. Recessed set screws. Dead front construction. Captive wire protectors. UL rated up to 10 amps and 12awg wire. 4 pole is 0.5"×0.5"×1.5".

This tool is the easy way to disconnect and work with Molex, H-D and similar multi-pin electrical connectors. Removes six sizes of pins from their nylon housings.

It’s easy to create clean and durable accessory wiring connections. This kit contains a useful selection of sizes for a variety of 12V electrical applications. There are three sizes of connector blocks and pins, each of which has male and female components. Wires are crimped to the pins (soldering optional) and then the pins clip into the connector blocks which are shaped to preserve polarity. The five small connectors take 20-24 ga. wire and are ideal for things like radar detectors or tiny LED voltmeters; the four medium size connectors take 18-24 ga. wire and are suitable for things like GPSs, radio receivers and those sorts of loads; and the four large ones take 14-20 ga. wire for connecting things like grip warmers, radio transmitters or extra lights. Includes instructions and thirteen connector sets plus several extra pins in each size. (92 pieces total.)

Designed for basic electrical tests, this digital multimeter offers reliable diagnostics for everything from measuring AC and DC voltages, checking resistance and continuity, and helping find elusive electrical gremlins. Test leads wind neatly around case for compact storage. This small, lightweight multimeter fits comfortably in your hand but is rugged enough to withstand travel use. 4.75"×2.75"x.75".

Diagnosing electrical gremlins is much more manageable with this handy circuit tester. Perfect for finding a break in any 6V, 12V or 24V circuit. Attached to the clear handle is a stainless steel probe ready to test bare wires, terminals or connectors. Heavy duty alligator clip is attached to tough, flexible wire. Illuminating handle light indicates live circuit between two points.

Completely sealed 20 amp switch with weather resistant coating and O-ring stem seal. Includes a stamped metal on-off indicator plate that fits over the 15/32" diameter, 3/8" long mounting stem and chrome plated handle. 8" wire leads. 12V. 1.25"×.75"×1.75".

Supply safe, fused power to accessory electronic devices. Uses four ¼" male blade connections for easy installation insert the best mini fuse (not included) to match the power requirements of each device. A clear cover with insulated O-ring provides protection and a water resistant seal. 15 amps per circuit. Fits almost anywhere. Simple is good. 3.2"×1.77"×1.5".

Easily organize electrical connections with this 4 position terminal block. Molded from UL rated 94 VO Thermoplastic with tin plated brass terminals and zinc plated #6-32 steel screws. Rated to 20 amps/150 volts max. 2.16"×.88"×.41".

This quality 120 piece selection of crimp connectors and terminals contains an ideal mix of individual items for 12V accessory wiring projects. Each metal crimp barrel is surrounded by a color coded, transparent, adhesive lined, heat-shrink tubing. When properly crimped and heated, the tubing shrinks and the adhesive flows creating a high quality environmental seal that prevents corrosion and provides excellent water and contamination resistance. These connectors provide superior protection from mechanical abuse, wire pullout and current leakage.

Handy kits that contain every size shrink wrap you need. Has over 100, 4" long pieces from 1/16"–3/8" diameter.

Practical kit includes eighty-six 6" pieces, in six useful sizes, of high quality, stable and flame retardant polyolefin tubing. Shrinks to half original size when heated. Sizes from 3/16"-1" wide. Black.