Heated Gear

Keep your chest and core warmer, with an easy to install Chest Insulation Pad. Extends the funtionality of the RoadcrafterLight into cooler riding conditions. Made from Windstopper® with a soft micro-fleece inner layer. Self-stores in a built-in pocket. 30 watts, 2.5 amps. Includes a fused, lighted power switch coil cord. Specify SAE, Quiconnect 2, or BMW connection. 16"×17". Black.

On colder rides enjoy quick warmth spreading evenly across your chest. It's a difference you'll feel even on shorter rides. Stuffing old newspapers underneath your jacket might cost a bit less, but that is uncomfortable and doesn't add heat. This patented bib is electric-warm, windproof and packs really small. The smooth outer fabric layer is black TLTex® WINDSTOPPER® and the side toward your body is a comfy black micro-fleece. The radiant electric heating layer is between.

The bib stays in place under your jacket perfectly because the inner fleecy layer is grabby and the outer WINDSTOPPER® layer is slippery. The comfortable low-profile fleece lined collar closes fast with hook and loop located at the upper chest and keeps drafts away.

Self-stores, power cord and all, into a built-in zippered pocket. Patent #D641,543S. 30 watts, 2.5 amps. Two sizes: Regular to 5'9”, and Tall over 5'10”. Includes your choice of a SAE Straight cord, or lighted power switch coil cord, both options come with the fused battery cord.

Additional Information/Resources:

Electrify any jacket's performance with a Kanetsu liner. Closely patterned after the standard Aerostich Darien liner, this electrically heated version provides an under-jacket environment that's always a lot warmer than the outdoor ambient. Enjoy a cozy micro-climate which can be up to 30º warmer than outdoor ambient.

Three heating circuits provide warmth through the sleeves, body and collar. The sleeves use a slightly 'hotter' heating wire due to the liner's slightly looser fit.

This liner is reversible for all wearing situations and features a built-in self storing pocket, a convenient cord storage pocket, and a lighted on/off switch on a coil-cord. The WINDSTOPPER® fabric shell blocks drafts 100% and packs down nicely for storage.

Includes: fused, lighted coil cord hookup and power switch. 75 watts/5 amps*. Specify QuiConnect 2, SAE or BMW connectors. Black. 36–54 regular.

*ELECTRIC LINER COMPATIBILITY: 2006 and newer BMW CAN-bus outlets are limited to 5.0 amps. Kanetsu Electric Liner (#267) and the Kanetsu AirVantage Electric Liner (#291) draw 5.5–5.7 amps, so the CAN-bus shuts down the circuit. The Kanetsu Electric Vests and Kanetsu Airvantage Electric Vests are ok because they draw less amps (no heated sleeves). All Kanetsu Liners can be used with the 2006 BMW's if a fused outlet is attached directly to the battery (BMW Accessory Socket #108 and In Line Blade Fuse Holder #4664 with a 10 amp fuse) or if a 1.25 ohm resistor is inserted in the BMW accessory outlet circuit.

Additional Information/Resources:

Our original electrically heated vest (since 1996). It remains the most proven, comfortably warm, everyday hard-wearing electrically heated vest available. It offers a unique blend of common sense engineering, warm wind blocking fleece, clean-compactible design and careful craftsmanship.

The fuzzy, cozy-warm, windblocking TLTec fleece is luxurious. This heated vest is extra versatile because it's reversible for varying conditions and situations. Wear fleece in or out.

Two pockets: one for storing the power cord and one that the entire vest pulls into, forming a neat, compact package. Includes: fused, lighted coil cord hookup and power switch. 45 watts / 3.3 amps (works with all BMW standard power outlets). Specify QuiConnect 2, SAE or BMW connectors. S-XXL.

Additional Information/Resources:

A more packable version of the original fleece electric vest. Like that model, this version is also a most reliable, comfortably warm, hard-wearing electrically heated vest.

You'll appreciate its warmth, ultra-compactness and draft-stopping efficiency the minute you slip it on. It's also the least restrictive to wear beneath a closely fitted jacket or riding suit. Two pockets: one for storing the power cord and one that the entire vest stuffs into, forming a neat, compact pillow. Includes: fused, lighted coil cord hookup and power switch. 45 watts / 3.3 amps (works with all BMW standard power outlets). Specify QuiConnect 2, SAE or BMW connectors.

WINDSTOPPER® fabric is 100% windproof and half as thick as TLTec Wind Blocker fleece. Black. S-XXL.

Additional Information/Resources:

Keep your hands warmer. Unique material reacts with your body to generate and retain heat. Antibacterial properties minimize odor for long wearing comfort. Lightweight, stretchable Polyester and Spandex material is thin enough to fit comfortably under your riding gloves to provide an added layer of warm insulation. Sizes S-XL. Black.

A nice pair of cold weather gloves with the added benefit of battery powered heat. Stainless Core heating technology combines with 3M Thinsulate Insulation to provide even warmth and heating, plus a Hipora® liner adds waterproof, windproof and breathable functionality. Leather fingers/palm and pre-curved fingers for a secure, comfortable grip and life-long durability. Rechargeable Lithium Ion battery and controller with 3 heat settings, powering gloves from 2.5 to 4 hours depending on selected temperatures. Adjustable wrist strap and gauntlet adjuster for secure fit. Black. M-XL.

Additional Information/Resources:

Serious hand protection from both the elements and impact. Built for durability and warmth, with integrated hard knuckle armor and full leather palm/fingers, wrapped around 200g of 3M Thinsulate insulation (20g in palm for improved tactile feel) and a Stainless Core heating system powered by a rechargeable Lithium Ion battery. Provides up to 4 hours of heat with 3 adjustable temperature settings. LED indicator displays heat status at a glance. Gauntlet glove design keeps out drafts and seals up with adjustable gauntlet cord and wrist strap for added comfort. Touch screen compatible too, so there is no need to remove your warm gloves to activate a GPS or mobile device. Pre-curved fingers and silicone print on palm ensure a secure, comfortable grip. Easy push-button heat control adjustability. Includes charger and storage bag. Black. M-XL.

Additional Information/Resources:

These are the nicest and warmest battery-powered heated glove we offer. Premium full-grain leather outershell and palm offer rugged durability, while the combined 150g Primaloft plus 100g Heat Lock insulation and a removable DryHand insert provide sublime comfort with all-day windproof, waterproof, breathable protection. Press the soft power button on the back-side of each glove to activate the flexible heating panels covering the back of each glove and wrapping around the fingers, to toggle four adjustable heat settings and provide up to six-hours of warmth from each rechargeable Li-ion battery. Gauntlet style cuff features easy to use one-handed wrist cinch strap. Black. M-XL.

Additional Information/Resources:

Connect two garments to a single power plug.

Additional Information/Resources:

Standard hookup for Kanetsu Vests and Liners. Length 30".

Additional Information/Resources:

SAE connectors are very reliable, waterproof, and rugged — unaffected by rain, mist, dirt. Useful for excessively adverse riding conditions. Kit includes Switch Coil Cord (#113), Powercord Extension (#109), and Battery Fuse Cord (#112).

Additional Information/Resources:

Our favorite. Faster to manipulate. Easiest to use. QuiConnect 2 coaxial connectors are quicker and easier to connect/disconnect in all situations. Slightly less electrical resistance than SAE, so your gear heats up a bit more quickly, too. Kit includes Switch Coil Cord (#173), Powercord Extension (#179), and Battery Fuse Cord (#176).

Additional Information/Resources:

Standard hookup for Kanetsu Vests and Liners. Illuminated push button on/off switch. Stretches from 3'–6'.

Additional Information/Resources:

Standard hookup for Kanetsu Vests and Liners. 10 A Fuse. Length 25".

Additional Information/Resources:

Connect to a standard power socket on your bike...or your car, snowmobile, etc.

Additional Information/Resources:

A connector wire with a standard power socket that fits a cigarette lighter/accessory plug.

Additional Information/Resources:

Standard BMW power sockets. Requires additional wiring.

This BMW switch coil cord easily connects your vest or liner directly to the standard BMW accessory socket on your bike. (BMW Socket (#108) is available separately and requires additional wiring to connect to the motorcycle battery).

Additional Information/Resources:

Standard BMW Plug. Requires additional wiring.

Warm, nearly wind-proof, TLTec Wind Blocker fleece. S–XXL. Choose Blue or Cayenne.

WINDSTOPPER® fabric is 100% windproof and half as thick as TLTec Wind Blocker fleece. Black. S–XXL. USA.

Route wiring or drinking tube to the best places. Strap has a spring clip end and a cord-holding snap end.

A coil cord for connecting the vest to the motorcycle. The ultimate in simplicity and reliability. Remains flexible in all temperatures. Stretches from 1.5'–5'.

This connector is used as a suit side entry pocket pass-through, and eliminates the need to thread the power wire through the side entry zip in one piece suits. The SAE end plugs into the electric garment, ending in a QuiConnect 2 coaxial male connector (inside the suit). Captured by the side entry zip or powercord port, this connects to a 6.5" QuiConnect 2 female wire with an SAE end to connect to the standard switch coil cord (outside the suit). The elec-gear wire pass-thru in all of the one-piece suits (Classic Roadcrafter, R3, R-3 Light) was inspired by Steve Hall, who called it the 'Hall-Pass'. Thanks Steve!'

Designed to simplify a regularly plugged and unplugged accessory, this panel mount pass-through installs conveniently into any panel or surface. We know riders who’ve installed it in the side or front of a tank or tail bag. Perfect for running electronics like GPS, MP3 player, fuzz buster…Uses standard SAE connector to pass power through any surface. Assimilates storage and power needs created by todays techno-farkle-moto-addicts. Resistance is futile...

For hours-long-comfort or bikes with older charging systems, this digitally regulates the amount of power to the garment, allowing you to set (or adjust) your vest or liner's maximum heat, or to the exact balance point where the battery continues to be charged. (Reassuring on dark, cold, wet, miserable nights when you need driving lights, heated clothing, and a gadget or two.) Features a rotary on/off switch with an LED that blinks faster as you turn up the heat. Plug-and-play with SAE connectors on a 16 3⁄8"(for connecting to the bike), and a 17 5⁄8" (for connecting to your garment) cord. 1.5"×2.25" ×.75".