Made In USA Gear

Allows two-piece Classic Roadcrafter pants to be worn as bib-style pants instead of attaching them to your jacket. Fully lined. Specify suit pant size and color.

Lighter-weight yet strong HT200 Denier Nylon TLTex® fabric with added 500 Denier abrasion-resisting areas at the elbow, shoulder and knees to provide increased abrasion resistance. Six removable oversized visco-elastic TF3 or TF6 impact pads provide additional abrasion and impact protection at the elbow, shoulder and knees, too.

Except for lighter HT200D Nylon replacing the 500D Cordura, all other details and features are the same as the Roadcrafter Classic Two Piece.

Four Jacket/Pant colors: black, grey, hi-viz, or tan. Three abrasion area colors: black, grey, or hi-viz. Women's sizes feature a smaller neck, narrower shoulders, more defined waist and extra hip room. Men's 34 regular, 36-54 short, regular or long. Women's 2-20 short, regular or long. Choose TF3 or TF6 armor. Made in America.

Thirty years on this fully lined Roadcrafter has been worn in every type of weather to nearly every place you can get to on a motorcycle. It is the original suit for everyday, all-distance commuting and touring.

Its luxurious full lining slips easily over your street clothes and the outer shell is tailored to minimize wind flutter and drag at higher speeds.

More than three decades of experience have proven the Roadcrafter Classic's superior impact and abrasion protection and its all-weather capabilities. The suit is covered with innovations for riders: 3M high-visibility Scotchlite™ reflective, nine strategically placed everyday-useful external pockets, six standard oversize TF impact armor pads, provisions for optional removable arm and thigh map pockets, optional hip armor and impact protection spine armor, effective water resistant zippered underarm and back vents, flapped hip-side zippers for access to your street pants, an all-day comfortable Ultrasuede collar, and a variety of adjustable tabs and zippers that allow you to custom fine-tune the fit.

Each one-piece Roadcrafter Classic is all about attention to detail, real-world riding needs, and meticulous craftsmanship. It's constructed of mil-spec 500 Denier TLTex® outer fabric, ballistic nylon, and a high pic Supernyl lining fabric.

Compared to traditional leather gear you'll ride warmer when it's cool, drier when it's wet, and cooler when it's hot.

Four standard body colors: Black, Grey, Hi-viz Lime Yellow, or Tan. Eight standard ballistics colors: Black, Grey, Silver, Hi-viz Lime Yellow, Yellow, Tan, Red, or International Orange. Machine washable. Women's sizes 2-20 short, regular or long (these feature a smaller neck, narrower shoulder, more defined waist, and extra hip room). Choose TF3 or TF6 armor. Made in America.

Patented roller technology eliminates most of the frictional losses of traditional cam straps, resulting in 10x the holding force in a strap that is far easier to use. Technically superior and simple to use, these straps are by far the best 1' webbing. Pack of four (4). Gray. 

The Light version folds small enough to carry in a pocket and unfold into a rectangular pillow when packing your suit. It’s not water repellent, but is useful as a wonderful organizer and packing tool inside hard saddlebags. Available in a Tall version, with 4" of add height for holding larger size suits or suits with added back and hip armor. Black. Regular 24"×6"×11", Tall 24"x6"x15".

All RAM systems use a 1" ball and socket system. This super strong rubber ball and socket system provides mounting flexibility and protects electronics from damage due to vibration. All components are interchangeable so you can switch attachments at either end of the clamping stalk for maximum versatility.

Flat surface mounts.

How about riding out your own back door for high adventure and long distances on just an average smallish bike and with some simple luggage and gear? Is it possible to travel unsupported and independently in such a manner? Yes, and the experience of traveling this way captures the most time-honored essences of motorcycling.

This book consists of 14 pages of summary text, with the balance arranged into appendices that cover such topics as food, improvised repairs, helpful resources for further information, useful websites, state-by-state listings of good roads, and bike-friendly hangouts.

Detailed examples of gear and its organization are based on real-life experience and offered as a starting point for your own trips. It fits readily in a pocket or tank bag and contains a distillation of experience, and information that will be a useful starting point for the beginning lightweight motorcycle tourist as well as a handy reference for an experienced rider. Saddle-stitched, 4"×6", 84 pp., b/w illus.

Packs flat, weighs less than 12 oz and is fueled by any dry sticks or debris you find nearby. Constructed of rugged 304 stainless steel, it is durable and comes with a lifetime warranty. Includes cross-bar adapters for securely holding the weight of any pot or pan without wobble. Natural fuel burning capabilities mean no messy or bulky fuel bottles to carry with. Sets up easily and is perfect for cooking anywhere, anytime. Made in the USA. 11.45 oz. 4.5”x5.5”x3.5”.

Additional Information/Resources:

For motorcycle wheels that are open in the middle (regular or cast spokes). It’s also packable, but it is really a little larger then most riders will want to carry. Ideal for garage workshop use. Adjustable for all sizes of wheels/tires. 17.5"x2"x2", 4.5 lbs.

The ideal place to hang your helmet and riding gear whether at home or the office. Attaches directly to any flat surface or with the Office Cube Adapter, will fit over the edge of a cubicle wall or door. Aluminum frame with hanger supporting a half-round cedar post, keeping helmet securely in place. A built-in shelf across the bottom stows your gloves and keys.

Integrated hanger hooks in the steel Office Cube Adapter also provide places to hang jackets and other gear. Includes mounting hardware. Choose classic Black or the tech look of clear coated Aluminum/Steel. Helmet Holder 12.6"×6"×10.6", 2 lbs., Office Cube Adapter 12.6"×6"×2.5", 2 lbs.

Made in America

Additional Information/Resources:

These pressurized (nitrogen-filled) ball points were actually developed so astronauts could write in outer space, but they are equally wonderful for marking damp maps, writing on soggy paper placemats, or philosophizing on greasy bathroom walls. The Bullet model has a removable clip, and a short, smoothly-rounded shape that lets you carry it in the front pocket of your jeans without getting stabbed in the thigh (3.6" closed, 5.3" open) Specify: Chrome, Black finish or Solid Brass. And back in the day the ol’ Russians had to use pencils.

Storing or traveling with your Aerostich suit or jacket is easy with one of these Garment Bags. Available in two lengths (Jacket or Suit versions) and two fabrics.

The lightweight version is made using black sil-nylon and is perfect for hanging your suit for closet storage (maybe to keep the other garments in your closet from direct exposure to the roadgrime).

The standard version is constructed of a water resistant black 500D Cordura® material, with a few added straps and hardware for rolling up to be carried or checked as baggage when traveling. Durable protection for your protective gear.

Both feature a diagonal zipper across the front of the bag for easy access. Jacket version measures 36"x24"x4" to fit any Darien or Roadcrafter Jacket. Specify light or regular.

Eliminate the risk of your helmet falling to the ground. Unique 1/4" ABS hook universally mounts permanently behind existing hand guards or bar end weights. Helmet hangs quickly and securely from the hook via strap or D-ring. Strategically placed holes allow for a small, long-shackled lock or cable for increased security. Also keeps a bag or other gear off the ground for hands-free pre-ride loading of your tank bag or panniers. Useful, convenient and there when you need it.

Genuine to the core. Waxed cotton has been used to make garments waterproof and breathable since the 1800’s. Now this time-tested fabric is combined with the advanced technology, innovative design of the Roadcrafter one piece suit to create a highly protective, incredibly comfortable and completely authentic one piece Cousin Jeremy riding suit.

The unique two-zipper entry system allows you to step into the suit and be ready to ride in just seconds. Unzips and removes just as quickly when you arrive at your destination. The luxurious black nylon inner lining slips easily over your street clothes, and the outer shell design is tailored to minimize wind flutter and drag at higher speeds.

Tough but supple 10.10-ounce wax cotton outer fabric requires no ‘break-in’, melding and forming to your body from the very first time you put it on. The more you wear it, the more comfortable it becomes, developing a weathered patina with extended use. Periodically re-waxing your suit will extend the long-life usefulness of this highly functional riding tool as well as maintainin maximum waterproofness in severe riding conditions. Removable TF3 or TF6 armor is included in the shoulders, elbows, and knees, along with a second layer of waxed cotton fabric at these critical areas to increase abraision protection. Pre-installed loop is integrated into the inner sil-nylon liner for easily adding optional back armor or hip armor.

Over three decades of innovations are integrated into the everyday useful suit features, including: nine strategically placed outer and one inner pocket for ample storage for your everyday carry needs, provisions for optional removable arm and thigh map pockets, effecticve water resistant zippered underarma nd back vents, flapped hip-side zippers for quick access to your street pants, an all-day comfortable Ultrasuede collar, and a variety of adjustable tabs and zippers allowing for a custom fine-tuned fit. The flaps covering the back vent area and the front logo pocket are made from the same color and weight fabric as the jacket body, but for riders wanting additional nighttime visibility, these flaps can be sewn with optional 3M Scotchlight® Reflective material.

Give a cousin Jeremy a try and you won’t be dissapointed with the hand-crafted, waterproof, breathable functionality incorporated into an easy to wear, proven design suitable for riding warmer when it’s cool, drier when it’s wet and cooler when it’s hot. Simultaneously edgy and effortlessly cool, while providing a superior fit, unmatched comfort and extreme performance when riding through all-weather, over any distance to every destination.

Choose from base jacket and pant colors available in Black, Brown, Green or Orange 10.10 oz. Waxed Cotton fabric, and select from Black, Brown, Green or Orange 10.10 oz. fabric added to the shoulder and elbow areas for increased abrasion protection. Sizes: Men's 34, 36–54 short, regular or long. Women's sizes 2-20 short, regular or long. Choose TF3 or TF6 armor. Made in America

The Tactical model eliminates the double-layer of abrasion-resistant fabric at the elbow/shoulder and knee areas. While slightly decreasing the total abrasion resistance at these areas, this allows the ultralight weight Tactical to wear even cooler and provides slightly more ease of movement. Everything else is the same as an R-3 Light. Available colors: black, grey, or hi-viz lime yellow.

Jump in, zip up and go. The R-3 'Lights' prioritize everyday commuting and errand running. All-in-one protection from weather and other mayhem, with your destination street clothing beneath. Perfect for short-hop on-and-off-the-bike urban use. Also wears great for relaxed day-long rides and on tours of any length.

Advanced zipper and flap designs make this an absolutely waterproof one-piece riding suit, and this lighter-weight model provides a slightly cooler-wearing experience during hot conditions, too. The suit maintains all the time-tested Roadcrafter design elements for unsurpassed function and a better fit.

R3 Light innovations include completely waterproof zippers, a snap-down collar with removable magnetic hold-open clasps, a hidden water-resistant wallet/phone/iPod pocket and custom adjustable impact armor positions.

Options include Integrated Boot Raincovers, Chest Impact and Insulation Pads (Standard and Electric/Heated versions), Boot Raincovers, Back and Hip Armor and all the other Roadcrafter options.

The R-3 Light's outer fabric has an abrasion resistance about two-thirds that of an R-3, but still provides real-world protection. May also be worn without any of its Impact Armor for weather or abrasion protection that packs away very compactly.

Standard machine washable (with removal of collar magnets). Men's 34 regular and 36–54 short, regular or long. Women's 2-20 short, regular or long. Choose TF3 or TF6 armor. Made in America.

Lighter-weight yet strong HT200 Denier Nylon TLTex® fabric with added 500 Denier abrasion-resisting areas at the elbow, shoulder and knees to provide increased abrasion resistance. Six removable oversized visco-elastic TF3 or TF6 impact pads provide additional abrasion and impact protection at the elbow, shoulder and knees, too.

Except for lighter HT200D Nylon replacing the 500D Cordura, all other details and features are the same as the Roadcrafter Classic Two Piece.

Four Jacket/Pant colors: black, grey, hi-viz, or tan. Three abrasion area colors: black, grey, or hi-viz. Women's sizes feature a smaller neck, narrower shoulders, more defined waist and extra hip room. Men's 34 regular, 36-54 short, regular or long. Women's 2-20 short, regular or long. Choose TF3 or TF6 armor. Made in America.

These hook & loop closure bags offer ultra-durable secure storage capacity with a faster, more convenient closure than zip-lock or zippered bags and drawstring stuff sacks. Perfect inside a tank bag, backpack or saddle bag. They are tough enough to stand up to vibrational wear, abrasion and long-term expedition use. The hook & loop strip across the top is ½" wide and end-to-end secure.

The smallest size is perfect to keep earplugs clean and protected. The largest works for full-page documents and file folders. In between sizes are great for first aid kit or cooking tools, or to protect and organize electronics. The one that's long and short is great as a travel office for organizing and keeping pens, receipts, money, and miscellany all in one place inside a tank bag or travel pack. The largest one is available in both a top and side opening version in response to customer requests to expand the storage versatility and usefulness.

We've been making and selling these for more than thirty years now. We're still using some of the originals. They don't wear out. Nobody else makes anything similar, and they continue to work better than anything else for what they do. Nine size configurations and 4 fabric options to choose from:

• Original are carefully made from blue 400D Oxford weave nylon, with a highly water-resistant PU (Polyurethane) coating on the inside.
• Lightweight are sewn from a highly water-resistant 70D grey nylon material, they are tough but not as stiff as the heavier fabric of the Original bags.
• Ultralight are constructed from silky soft, ultralight black SilNylon fabric, making them super packable when not in use, and highly protective when they are.
• Traditional Waxed Cotton bags are hand-crafted from the same authentic brown waxed cotton used to make Falstaff and Cousin Jeremy riding gear and offer rugged durability, water resistance and a retro-cool authentic look.

All RAM systems use a 1" ball and socket system. This super strong rubber ball and socket system provides mounting flexibility and protects electronics from damage due to vibration. All components are interchangeable so you can switch attachments at either end of the clamping stalk for maximum versatility.

A tightening screw on the side of the arm clamps firmly in place, and allows you to pivot the ball and socket connection or completely disconnect the ball from the socket.

Pendant matches the tread styling of the MC Tire Rings. Connect to your passion or give as a gift to show you understand another’s commitment. American made original designs crafted in .925 Sterling Silver. 38mm x 13mm.

Perfect for conserving storage space in racetrack vans and small garages, this tool balances wheels precisely but doesn’t take up much room when not in use. Beautifully machined aluminum pillow blocks hold low friction bearings and rest perfectly on any two chairs, stools or garage jack stands: voila! A fast, accurate wheel balancer. 1.5 lbs.

COMPATIBILITY CHART