Zip this lined Cordura panel into your two piece Roadcrafter suit to allow greater forward lean and a more comfortable fit on some sport bikes. Increases the suit's torso length by about 3". Black.

Secures firmly to the left sleeve loop on all Aerostich jackets. Comes with a waterproof form for you to note vital information, such as: name, age, address, phone numbers, contacts, blood type, allergies, family doctor and other information that communicates for you, in the event you cannot. Includes an adhesive loop strip for use on helmets and non-Aerostich gear. 5.5"×1.5". Specify Red or Hi-Viz Yellow.

The Standard is more for everyday riding applications, it is contour cut for total freedom of movement and is constructed with TF3 and a multi-layer polypropylene shell. TF3, polyester, and Cordura.

These full length back protectors provide higher levels of protection for kidneys, spine and coccyx areas. The TF3 versions are fully fitted for all Aerostich suits and jackets using integrated hook & loop mounts, or can be worn in another garment with the detachable, optional belt (available free upon request with purchase). An optional adapter sleeve (#1109) is available for the TF5 back protector to allow it to be worn via hook & loop attachments or with the optional belt. All back impact armor options are made to withstand multiple hard impacts while being very lightweight and comfortable. Specify suit size. S, M, L.

For maximum protection. Two oversized TF3 hip impact protectors in shaped pockets that attach with hook & loop to the lining of any Aerostich pant or suit. Includes adhesive hook & loop for fitting into any garment. Available with or without pre-curved shape with a hard shell.

Back and Hip Impact Armor Owners Guide

A new generation impact protection system for the Aerostich Transit Suit. Specially developed armor provides high comfort with extraordinary security. Maintains impact dampening abilities in both high and low impact situations. These molded pre-curved pads provide secure hip protection. 5 ½” x 7 ½”. Add the optional Supernyl sleeves (#1110, sold separately) with hook & loop mount areas to allow easy fitting in Dariens, Roadcrafters and AD-1s. Includes two (2) TF5 Hip Impact Armor Pads only.

Sleeves with integrated hook & loop to allow TF5 Hip Impact Armor to attach to the lining of any Darien or AD1 pant and Roadcrafter one or two piece suit. TF5 Hip Armor (#1105) sold separately.

Allows TF5 Back Armor to be used in a Darien or Roadcrafter jacket. Optional belt available (free upon request with product purchase) to wear separately. Specify S, M or L.

Allows two-piece Classic Roadcrafter pants to be worn as bib-style pants instead of attaching them to your jacket. Fully lined. Specify suit pant size and color. In-stock sizes/colors are limited. Production time for back-ordered sizes and colors is approximately 2 weeks.

Far better than 'afterthought' jacket liners. More durable, comfortable, functional and versatile.

Their reversible design includes seven purposeful pockets in a black Supernyl fabric shell, including dual hand-warmer pockets, a side entry drop-in ergonomic left side chest pocket, a top opening chest pocket on the right side, two large zippered compartments behind each hand warmer pocket and a large zippered pocket across the lower back that the entire jacket to self-stores neatly within for packing and travel. Inside-out when packed, with integrated webbing loops so it may be safely attached to your bike, or worn on a belt like a fanny pack. Also works well as a sleeping or reading pillow when camping.

The wearable-both-ways liner also features underarm zips which perfectly match those on Darien jackets to provide superior venting adjustability and more comfort across a wider temperature range. You'll also appreciate the handlebar-friendly longer sleeve lengths, a just-right collar height and the comfortable stretch knit wrists and waist.

Because they are reversible this liner may be worn fleece-on-the-inside for great air-trapping warmth, or reversed to help it slip on or off faster within a Darien (or any other) outer jacket.

The grey TLTec Wind Pro model features a thick, dense 200 wt. wind resistant “super fleece” which is extremely breathable yet provides 4x better insulation and more draft resistance than common department store fleeces.

The blue TLTec Wind Blocker version is made with a slightly thinner and even more highly windproof 100 wt. fleece that offers 2X faster moisture wicking than other windproof fleeces, while retaining good breathability for all day comfort. It's also marginally more compact-to-pack. Because of its slightly more wind-blocking TL Tec, it also offers a bit higher insulation level (as measured in lab testing) than the noticeably thicker Wind Pro model.

Wear either as a cold weather comfort layer inside a Darien Jacket, or alone as a casual/off-bike jacket. Wherever you are going, both eliminate some of the weight and bulk of traditional liners, and both are equally long-use durable. They both feature a durable water repellent (DWR) finish to keep you drier and more comfortable thru the wettest conditions.

Either version will wear a good deal warmer than you'd expect on cool mornings, and both compliment a Darien jacket perfectly. With all new Darien jacket construction an optional zip-in liner zipper (#375) is available at no charge, but most wearers prefer to simply wear these together, without this complication. It's faster and easier. Machine washable. Sizes 36-54.

Additional Information/Resources:

Far better than 'afterthought' jacket liners. More durable, comfortable, functional and versatile.

Their reversible design includes seven purposeful pockets in a black Supernyl fabric shell, including dual hand-warmer pockets, a side entry drop-in ergonomic left side chest pocket, a top opening chest pocket on the right side, two large zippered compartments behind each hand warmer pocket and a large zippered pocket across the lower back that the entire jacket to self-stores neatly within for packing and travel. Inside-out when packed, with integrated webbing loops so it may be safely attached to your bike, or worn on a belt like a fanny pack. Also works well as a sleeping or reading pillow when camping.

The wearable-both-ways liner also features underarm zips which perfectly match those on Darien jackets to provide superior venting adjustability and more comfort across a wider temperature range. You'll also appreciate the handlebar-friendly longer sleeve lengths, a just-right collar height and the comfortable stretch knit wrists and waist.

Because they are reversible this liner may be worn fleece-on-the-inside for great air-trapping warmth, or reversed to help it slip on or off faster within a Darien (or any other) outer jacket.

The grey TLTec Wind Pro model features a thick, dense 200 wt. wind resistant “super fleece” which is extremely breathable yet provides 4x better insulation and more draft resistance than common department store fleeces.

The blue TLTec Wind Blocker version is made with a slightly thinner and even more highly windproof 100 wt. fleece that offers 2X faster moisture wicking than other windproof fleeces, while retaining good breathability for all day comfort. It's also marginally more compact-to-pack. Because of its slightly more wind-blocking TL Tec, it also offers a bit higher insulation level (as measured in lab testing) than the noticeably thicker Wind Pro model.

Wear either as a cold weather comfort layer inside a Darien Jacket, or alone as a casual/off-bike jacket. Wherever you are going, both eliminate some of the weight and bulk of traditional liners, and both are equally long-use durable. They both feature a durable water repellent (DWR) finish to keep you drier and more comfortable thru the wettest conditions.

Either version will wear a good deal warmer than you'd expect on cool mornings, and both compliment a Darien jacket perfectly. With all new Darien jacket construction an optional zip-in liner zipper (#375) is available at no charge, but most wearers prefer to simply wear these together, without this complication. It's faster and easier. Machine washable. Sizes 36-54.

Additional Information/Resources:

Keep your phone, GPS, or radar detector handy on your left or right forearm inside this water resistant and zippered pocket that both straps and hook & loops in place to give you a stable and secure platform. Also works well with an EZ Pass or Highway Toll Pass, allowing you to roll quickly through a toll booth by simply extending your left arm. Depending on your equipment, some controls may be workable through the top window without opening the pocket. Black Cordura. Standard 6.5"×3.75". Large 8"×4.75".

Hook and loops on and is perfect for toll or parking ramp change. Fabric matches Roadcrafter and Darien. 6.5"×4.5". Black, grey, hi-viz lime yellow, orange, oxblood or tan. 6.5"×4.5"

Hook and loops on and is perfect for toll or parking ramp change. Fabric matches DarienLight 200 Denier black, grey, hi-viz lime yellow or tan. 6.5"×4.5"

Hook and loops on and is perfect for toll or parking ramp change. Fabric matches Falstaff and Cousin Jeremy waxed cotton black or brown. 6.5"×4.5"

You’ll quickly become addicted to this face shield squeegee. Made of a stretchy silicone material that easily conforms to the thumb or index finger of your left hand, VeeWipes make riding in the rain safer. Pack contains two sizes (one each) to fit most glove sizes and thicknesses. Trim with a scissors for a custom fit.

The two little .5 oz bottles are a nice flat, oval shape so they pack flat in any pocket. These won’t leak or spill like tiny pump sprays can, either. One’s got a windshield cleaner, the other is “Protectall” (#4796), a fabulous all-purpose cleaner and polish. Also included are a microfiber cleaning cloth and a compact 3"×5" Cordura carrying case. An indispensable shield cleaning kit that packs small enough carry along on every ride, ready for use at a moments notice. No excuses.

Made in America 

Yes, I do use our little face shield kit. And for some reason don’t miss the ’spray pump’ component. Over the last few years I've become more squeamish about using the filthy windshield cleaning tools in the dirty water out by the gas pumps. I was fine doing that for years but now what I do is take some of the paper towels off the pump island and jam them into my helmet and use the sink in the rest room to clean my helmet. This takes a little more time but at least I’m getting clean water. I don’t use the Protect-All wax (one bottle has windex and the other Protect-All) during the day. I usually apply a fresh coat at night after the day’s ride is over. My last trip was six road days and four motel nights (to-and-from NYC the slow way) so I did the wax treatment four times. When it rains on a Protect-All’d face shield it’s almost as good as Armor-All, and bug splats are also easier to remove.

-- Mr. Subjective, 6-2019

A soft fleecy environment for your spare faceshields. If you have wanted to carry more than one tint or a replacement for possible damage that may occur on a trip, you may have wished for a transport solution like this one. Shield slips into the fleece bag and seals securely with a hook and loop flap. Black. 19.75"×5.5".

The Competition is a slightly stiffer back protector with an impact protection system similar to the Standard armor, but covering a larger area. It's ideal for track days, high speed backroad twisties and other fun hooligan-type riding applications. (You know who you are…) TF3, polyester, and Cordura.

These full length back protectors provide higher levels of protection for kidneys, spine and coccyx areas. The TF3 versions are fully fitted for all Aerostich suits and jackets using integrated hook & loop mounts, or can be worn in another garment with the detachable, optional belt (available free upon request with purchase). An optional adapter sleeve (#1109) is available for the TF5 back protector to allow it to be worn via hook & loop attachments or with the optional belt. All back impact armor options are made to withstand multiple hard impacts while being very lightweight and comfortable. Specify suit size. S, M, L.

This connector is used as a suit side entry pocket pass-through, and eliminates the need to thread the power wire through the side entry zip in one piece suits. The SAE end plugs into the electric garment, ending in a QuiConnect 2 coaxial male connector (inside the suit). Captured by the side entry zip or powercord port, this connects to a 6.5" QuiConnect 2 female wire with an SAE end to connect to the standard switch coil cord (outside the suit). The elec-gear wire pass-thru in all of the one-piece suits (Classic Roadcrafter, R3, R-3 Light) was inspired by Steve Hall, who called it the 'Hall-Pass'. Thanks Steve!'

This zippered window pocket attaches with hook & loop to the left sleeve of all Darien jackets and Roadcrafter suits. Perfect for a mini door remote or parking pass, it also works well with an EZ Pass or Highway Toll Pass, allowing you to roll quickly through a tollbooth by simply extending your left arm. It'll also keep a compass easy to see and well away from nearby metals. 6.5"×4.5". Made in USA

This clear pocket attaches with hook & loop to the left leg of all Darien and AD-1 pants and Roadcrafter suits. It's great for holding maps or directions when you're not using a tank bag. Includes adhesive hook & loop for easy installation on other garments or your bike's fuel tank. Best for small and medium suits/pants. Made in USA. 8½” x 6”

Storing or traveling with your Aerostich suit or jacket is easy with one of these Garment Bags. Available in two lengths (Jacket or Suit versions) and two fabrics.

The lightweight version is made using black sil-nylon and is perfect for hanging your suit for closet storage (maybe to keep the other garments in your closet from direct exposure to the roadgrime).

The standard version is constructed of a water resistant black 500D Cordura® material, with a few added straps and hardware for rolling up to be carried or checked as baggage when traveling. Durable protection for your protective gear.

Both feature a diagonal zipper across the front of the bag for easy access. Jacket version measures 36"x24"x4" to fit any Darien or Roadcrafter Jacket. Specify light or regular.

Storing or traveling with your Aerostich suit or jacket is easy with one of these Garment Bags. Available in two lengths (Jacket or Suit versions) and two fabrics.

The lightweight version is made using black sil-nylon and is perfect for hanging your suit for closet storage (maybe to keep the other garments in your closet from direct exposure to the roadgrime).

The standard version is constructed of a water resistant black 500D Cordura® material, with a few added straps and hardware for rolling up to be carried or checked as baggage when traveling. Durable protection for your protective gear.

Both feature a diagonal zipper across the front of the bag for easy access. The Suit version is 75"x24"x4" to accommodate a one-piece or two-piece suit. Specify light or regular.

More than common and generic ‘outdoor’ fleece jackets, these are both tailored and engineered for riding. Each Aerostich fleece jacket is made right alongside the Roadcrafters and Dariens, and is designed to work perfectly within all of your riding gear. It’s a warm, draft-blocking, comfortable, lightweight layer of insulation perfect for three and four season rides. They wear wonderfully off-the-bike, too.

The details make a difference you can feel. We start with genuine Polarfleece (The original…there are many inferior copies) and YKK zippers. Each collar is tapered for more comfort with a helmet strap and the sleeve diameter is trimmed down for less bulk under riding gear. Sleeves are more forward rotated, too. And the long underarm ventilation zippers match Roadcrafter suits. Durable Lycra/nylon bindings at the hem and sleeves are comfortable and stop drafts without absorbing water.

The torso is also a bit shorter in front and longer in back for a better fit, and the sleeves are usefully a bit longer than you’ll find in typical fleece jackets. Zippered inside and outside chest pockets secure valuables like wallets, and zippered side pockets are placed slightly forward for easier access. A quick-draw inner chest pocket is ideal for sunglasses or a bandanna.

A high-warmth, low-bulk jacket that will become your favorite the first time you put it on. Machine wash. S–XXL. Made in USA

More than common and generic ‘outdoor’ fleece jackets, these are both tailored and engineered for riding. Each Aerostich fleece jacket is made right alongside the Roadcrafters and Dariens, and is designed to work perfectly within all of your riding gear. It’s a warm, draft-blocking, comfortable, lightweight layer of insulation perfect for three and four season rides. They wear wonderfully off-the-bike, too.

The details make a difference you can feel. We start with genuine Polarfleece (The original…there are many inferior copies) and YKK zippers. Each collar is tapered for more comfort with a helmet strap and the sleeve diameter is trimmed down for less bulk under riding gear. Sleeves are more forward rotated, too. And the long underarm ventilation zippers match Roadcrafter suits. Durable Lycra/nylon bindings at the hem and sleeves are comfortable and stop drafts without absorbing water.

The torso is also a bit shorter in front and longer in back for a better fit, and the sleeves are usefully a bit longer than you’ll find in typical fleece jackets. Zippered inside and outside chest pockets secure valuables like wallets, and zippered side pockets are placed slightly forward for easier access. A quick-draw inner chest pocket is ideal for sunglasses or a bandanna.

A high-warmth, low-bulk jacket that will become your favorite the first time you put it on. Machine wash. S–XXL. Made in USA

On extended trips you can count on experiencing higher elevations, all-day cold snaps, or some chilly early starts. These pants are made to a functional, comfortable pattern and pack light and small. For ventilation and convenience, #5 YKK two-way zippers run down the inside, just like the Roadcrafter pant design, so they go on easily, even over boots. Step through the right leg, attach the top left full length zipper and slide both zippers down. Putting them on is faster and easier than changing into long underwear. Many riders wear them over their jeans and under a riding suit. They provide a remarkable amount of extra warmth. Blue or Green. Machine wash. S (28-30), M (32-34), L (36-38), XL (40-42), XXL (44-46). Made in USA

Additional Information/Resources:

This comfortable knit jersey maintains a comfortable “touch” even when wet. Made of a substantial polyester, with a bit more body than most, lightly padded elbows and lycra collar and cuffs ensure durability and a good fit. Simple is good. Self-stores in its own hidden pocket. We make these ourselves, right alongside the Roadcrafter and Darien suits. Black, Green or Grey. M–XXL. Made in USA

Designed by the ‘Under-ground Terrorist Motorcycle Cult’, this shirt makes uh... a statement that is succinct and may engender amusing conversations about geopolitical subjects. Alarming and funny. Black, with the tastefully small UTMC logo on the back up by the neck. 100% cotton. Black. M-XX.

The zippered compartment on the back is long enough for three stacks of bills placed end-to-end. This is a discreet way to carry hoards of fifties or hundreds on long trips… or just a safe place to forget a single “emergency” dollar. A flat row of quarters will fit, too. One size fits all. Belt can be shortened by cutting and fusing. Black nylon webbing 1.25" wide, 46" long. Durable cam-action black nylon buckle (money not included).

Small enough to take on all your road trips, these pack into a built-in self-storing pocket about the size of your hand. Overall, it’s half the size of the next smallest full-coverage cover because it’s made from a thinner, lighter fabric. The strong opaque 2 oz siliconized ripstop nylon is plenty tough and keeps water and dust off your bike... it’s widely used in parachutes, sailboat spinnakers, kites and skysails.

The integrated elastic cinch cord tightly snugs all covers close to your bike so it won’t blow off during a breeze, and additional grommets allow for further binding or tying down. The Aerostich label is purposefully placed at the front bottom center, right on the hem, so it’s easy to find the front of the cover.

For improving overnight security at the seediest, darkest motel parking lot, the self-storing pocket on the hem of the cover also doubles as a portable battery powered motion-detecting alarm holder, to scare the pants off of whoever wants to take a peak at what’s below.

Large size covers loaded GS1100’s, Gold Wings and other dreadnought sized machines. Medium fits all sportbikes, standards, dual sports, and sport touring bikes with smaller windshields. Small fits scooters. Seat Saver model fits all bikes, covering vital areas of instrument pod, handlebars, gas tank and seat. Black.

Made from 2oz/sq yd silicone coated Cordura® 33d ripstop nylon.

Total overall dimensions:
Large #1735 - Length 177.5" x Width 136"
Medium #1733 - Length 154.5" x Width 129.5"
Small #1738 - Length 150" x Width 120"

Other Reviews

Editorial, Field Tested: Aerostich Ultralight Bike Cover

Additional Information/Resources:

Small enough to take on all your road trips, these pack into a built-in self-storing pocket about the size of your hand. Overall, it’s half the size of the next smallest full-coverage cover because it’s made from a thinner, lighter fabric. The strong opaque 2 oz siliconized ripstop nylon is plenty tough and keeps water and dust off your bike... it’s widely used in parachutes, sailboat spinnakers, kites and skysails.

The integrated elastic cinch cord tightly snugs all covers close to your bike so it won’t blow off during a breeze, and additional grommets allow for further binding or tying down. The Aerostich label is purposefully placed at the front bottom center, right on the hem, so it’s easy to find the front of the cover.

For improving overnight security at the seediest, darkest motel parking lot, the self-storing pocket on the hem of the cover also doubles as a portable battery powered motion-detecting alarm holder, to scare the pants off of whoever wants to take a peak at what’s below.

Seat Saver model fits all bikes, covering vital areas of instrument pod, handlebars, gas tank and seat. Black.

Made from 2oz/sq yd silicone coated Cordura® 33d ripstop nylon.

Editorial, Field Tested: Aerostich Ultralight Bike Cover

Whip it out for high performance on hot asphalt. The CFSP looks and works better than a flattened can, which is never around when you need one anyway. Stiff and light, the Carbon Fiber Sidestand Plate is about the same dimensions as a pack of cigs (but thin), so it will fit into your pocket with room to spare. Included is a natty Aerostich Ultrasuede carrying sleeve that protects you from earthen parking lot dirt. The sleeve may be attached to the inside of your bike’s fairing so it’s always at the ready. 4"×2.5.

The 62" black nylon utility cord loops over the left grip to eliminate bending to retrieve. When you’re ready to go, just reel it in while comfortably saddled. Includes a “Remove Before Flight” ribbon so you’ll never accidentally leave it behind. Same black ultrasuede storage bag as the CFSP. Made in USA

Features

• Ultra-light and ultra-strong Carbon fiber.
• Parachute cord with hand-grip loop makes it easy to pull it up after you mount the bike.
• Red ‘remove before flight’ flag to remind you to pull it up before taking off.
• As ridiculous as you can imagine, but despite that, it works well.
• Looks cool, sells poorly, so you’ll probably never see another at any moto-gathering event.

Keep your chest and core warmer, with an easy to install Chest Insulation Pad. Extends the funtionality of the RoadcrafterLight into cooler riding conditions. Made from Windstopper® with a soft micro-fleece inner layer. Self-stores in a built-in pocket. Black.

WINDSTOPPER® fabric is 100% windproof and half as thick as TLTec Wind Blocker fleece. Black. S–XXL. USA.

Warm, nearly wind-proof, TLTec Wind Blocker fleece. S–XXL. Choose Blue or Cayenne.